Maximum recording time, DA4 Double Azimuth helical | JVC HR-S6722EK

SPECIFICATIONS

GENERAL

Power requirement	: AC 220 V – 240 V`,
Power consumption	50 Hz/60 Hz
Power consumption
Power on	: 23 W
Power off	: 5.2 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)	: 400 mm x 94 mm x 344 mm
Weight	: 4.1 kg
Format	: S-VHS/VHS PAL standard
Maximum recording time
(SP)	: 240 min. with E-240 video
	cassette
(LP)	: 480 min. with E-240 video
	cassette
VIDEO/AUDIO
Signal system	: PAL-type colour signal and
	CCIR monochrome signal,
	625 lines/50 fields
Recording system	: DA4 (Double Azimuth) helical
	scan system
Signal-to-noise ratio	: 45 dB
Horizontal resolution	: 250 lines (VHS)
	400 lines (S-VHS)
Frequency range	: 70 Hz to 10,000 Hz (Normal
	audio)
	20 Hz to 20,000 Hz (Hi-Fi
	audio)
Input/Output	: 21-pin SCART connectors
	(IN/OUT x 1,
	IN/DECODER x 1)
	RCA connectors
	(VIDEO IN x 1, AUDIO IN x 1,
	AUDIO OUT x 1)
	S-Video connectors
	(IN x 1, OUT x 1)

TUNER/TIMER

TV channel storage
capacity	: 99 positions
	(+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage	: VHF 44.5 MHz – 143 MHz/
	143 MHz – 470 MHz
	UHF 470 MHz – 862 MHz
Aerial output	: UHF channels 22 – 69
	(Adjustable)
Memory backup time	: Approx. 60 min.
ACCESSORIES
Provided accessories	: RF cable,
	Satellite Controller,
	Infrared remote control unit,
	"AA" battery x 2,
	S-VHS ET labels

Specifications shown are for SP mode unless otherwise specified.

E.& O.E. Design and specifications subject to change without notice.

HR-S6722EK

VICTOR COMPANY OF JAPAN, LIMITED

COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD.

	EK	Printed in Japan
	EK	0400IYVIDVP
		0400IYVIDVP

Image 60

JVC HR-S6722EK setup guide Maximum recording time, DA4 Double Azimuth helical

Contents

HR-S6722EK Safety Precautions Connection to the mains supply in the United Kingdom Moisture Condensation Do not place the recorder Some Dos And Donts On The Safe Use Of Equipment Quick SET UP Guide To connect to a TV with 21-pin AV input connector Scart Back of TVBack of Recorder Mains outlet Mains Power Cord Video Connection Before performing the following procedure, make sure that Auto for Auto Set Up functionRefer to With the AV or S-VIDEO connection Tion pg and the TV is turned on, Or remote control until the display panel Shows either the display as illustrated onProgress, this process will be interrupted You will need to start again. See Notes below If auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failed TV Auto Power On Link FunctionsTurn on the Recorder NexTView Link Satellite Receiver Control Setting Access SAT Control SET Screen Enter Satellite RECEIVER’S BrandCheck Result of Test Playback Load a CassetteFind Programme Start Point Start Playback Pause During Playback Activate HIGH-SPEED Search Recording Select Preset to Watch Reset CounterEngage ITR Mode SET Counter Display Video Plus+ Timer Programming Access Video PLUS+ ScreenAccess Video PLUS+ Program Screen Enter Pluscode Number Timer Warning PDC Recording Express Timer Programming Before performing Express Timer ProgrammingEnter Programme Start Time Time SET PDC Mode Timer ModeReturn to Normal Engage RECORDER’S Check, Cancel And Replace Programmes Access Programme SCREEN/ DisplayCancel or Replace a Programme Return to Timer Mode When programmes overlap each other Cancel or Change Programme SettingTo cancel a programme Confirm Overlapping Programmes Playback Picture Adjustment Adjust TrackingOverride Automatic Tracking Manually Selecting Sound You Want Receiving Nicam Stereo And Bilingual ProgrammesSoundtrack Selection During Playback Looking For Scene You Want Activate Index SearchActivate Instant Review Skip Over Unwanted Recording According To Tape Type Super VHS S-VHS VHS ET and VHS Playback/ Recording According To Tape Charac- teristics S.T. Picture System Recording PlaybackOr press Record on the recorder Connector TV Aerial cable Audio in connector Automatic Satellite Programme RecordingSatellite Receiver Unit Aerial Access Main Menu Screen Select L-2 Select ModeREC Mode Screen Access Main Menu Screen Access Mode SET ScreenSelect Picture Control SET Mode Minimizing Picture Degradation While Editing Edit From Camcorder Input Mode SET Edit ModeEdit To Or From Another Video Recorder SET Recording DECK’S Recorder Player OUTPUT/INPUT Setting SELECT/INPUT Setting ENABLE/DISABLE ON-SCREEN Display Other FunctionsOn-Screen Display Power Save Mode Power SAVE, then press Auto Timer Auto SP→LP TimerNext Function Memory Repeat Playback Ntsc PlaybackActivate Repeat Playback Connection To Stereo System Speaker Television Mains outlet Clock Set Just Clock Video Plus+ Setup NumberGuide Program Number Set Access Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET Video Channel With RF Connection Tuner Set Perform Auto Channel SETAuto Channel Set Screen preset positions ProceduresAfter Scan Completed Is displayed on the screen Storing Channels Manually Select BandInput Channel Enter NEW Channel Information When Receiving a Scrambled Broadcast Change Station Preset PositionFine-Tuning Channels Already Stored Delete a Channel Access Manual Switch StationsChannel SET Screen Select NEW Station TV Station And ID List TV Station Channel Number Guide Questions And Answers Ä remain lit on the display panel. Is there Problem?What happens if the tape runs out during recording? Troubleshooting Ejected, and ä and on Record Safety tab removed Tape-to-tape editing is not possibleWon’t stop Index Front View Audio OUT L/R Connectors enable Tape Speed Indicators display mode of recording light Remote Control Fast Forward FF Button fast-forwards tape VCR, TV PR +/-,TV +/-, TV Muting Maximum recording time DA4 Double Azimuth helical