Fast Forward FF Button fast-forwards tape

^STANDBY/ON Button — same as button on recorder.

&AUDIO Button changes output sound mode. ☞ pg. 25

(TV Muting) Button mutes sound of connected TV. ☞ "Operating JVC TVs" in the right column.

*– –:– – (Display) Button — same as button on recorder. ☞ pg. 17

(DAILY Button enables timer recording of daily serials. ☞ pg. 19, 21

)WEEKLY Button enables timer recording of weekly serials. ☞ pg. 19, 21

qAUX Button selects recorder's auxiliary input mode. ☞ pg. 33, 34

wä(TIMER) Button engages timer-standby mode. ☞ pg. 19, 21

eDATE +/– Button inputs date of programme for timer recording. ☞ pg. 20

rPR +/– Button — same as button on recorder. ☞ pg. 16

tAuto Tracking Button () enables/disables auto tracking mode during playback ☞ pg. 24 SP/LP Button selects tape speed. ☞ pg. 16

y30 SEC Button initiates a 30-second period of fast-motion playback. ☞ pg. 26

uPlay Button — same as button on recorder. ☞ pg. 14, 15

iFast Forward [FF] Button fast-forwards tape;

initiates forward high-speed search. ☞ pg. 14, 15

oPause Button — same as button on recorder. ☞ pg. 15, 16

pOK Button enters selections made in on-screen menus. ☞ pg. 11

Q @ #Button initiates functions such as Index Search ☞ pg. 26, variable-speed search, frame by frame playback. ☞ pg. 15

TV +/– Button controls volume of connected TV. ☞ "Operating JVC TVs" in the right column.

The remote control can operate most of your video recorder's functions, as well as basic functions of JVC TV sets. (See below.)

●Point the remote control toward the sensor window.

●The maximum operating distance of the remote control is about 8 m.

To operate your TV, while holding down the TV button, press the corresponding button: STANDBY/ON , TV/

NOTES:

●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.

●Depending on the type of JVC TV, there may be cases where some or all functions cannot be operated using the remote control.

●If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.