57
1
87
32 4
6
5
1Mains Power Cord supplies power to recorder.
Z pg. 6
2S OUT Connector enables S-VIDEO connection to
TV or second recorder. Z pg. 7, 34
3AV1 (L-1) IN/OUT Connector enables AV connec-
tion to TV or second recorder; input recordable when
"L-1" selected. Z pg. 6, 34
4ANT. IN Connector enables connection of aerial.
Z pg. 6
5AUDIO OUT (L/R) Connectors enable
connection of audio cassette recorder, TV or second
video recorder for dubbing. Z pg. 41
REAR VIEW
6AV2 (L-2) IN/DECODER Connector enables connec-
tion of satellite receiver, decoder or second recorder;
input recordable when "L-2" selected. Z pg. 30, 34
7SAT CTL Connector enables connection of the
provided Satellite Controller for timer recording with
a satellite receiver. Z pg. 12
8RF OUT Connector enables connection to aerial
terminal of TV receiver. Z pg. 6
1B.E.S.T. Picture System Display lights from bottom to
top while B.E.S.T. is active. Z pg. 28
2Symbolic Mode Indicators
3Tape Speed Indicators display mode of recording; light
during Record or Play mode. Z pg. 16
*EP is only for NTSC playback.
4Programme Time Indicators show the programme
start time ( ) and the programme stop time ( ) for
timer-recording. Z pg. 20
5"Timer" Indicator lights when ‰ has been pressed to
engage Timer mode. Z pg. 19, 21
6Tape Remaining Time Indicator displays time
remaining on tape when certain buttons are pressed.
Z pg. 17
7Channel Display shows preset position where the
station currently being received is stored.
Clock Display shows current time. Z pg. 10
8Instant REVIEW Indicator blinks after timer-recording
and shows how many programmes have been timer-
recorded. Z pg. 26
DISPLAY PANEL
REVIEW
SP
9@#$
2 7 81 3 5 64
VPS/PDC
VCR
!
0
STILL:
SLOW:
RECORD:
RECORD PAUSE:
PLAY:
FF/REW VARIABLE
SEARCH:
9PDC Indicator lights when PDC has been engaged
for timer recording. Z pg. 19, 21
*VPS (Video Programme System) recording is not currently
available in the U.K. and not possible with this recorder.
0S-VHS Indicator lights when a cassette marked S-VHS
is inserted with S-VHS mode set to "ON", when an
S-VHS-recorded tape or S-VHS ET-recorded tape is
played back, or when S-VHS ET mode is engaged.
Z pg. 27
!VCR Indicator lights when the video recorder is in
the video mode. At this point, the TV automatically
enters AV mode. Z pg. 14
@"Cassette Loaded" Mark lights once a cassette is
inserted; remains lit until cassette ejected.
#Counter shows time elapsed since playback or
recording began.
With displayed, shows time remaining from
current tape position to end of tape (Z pg. 17).
Counter, Preset Position*, Clock and Tape Remaining
Time Display appear alternately when – –:– –
(Display) is pressed.
*Preset Position is not displayed during playback.
$Mode shows external input mode selected (L-1, L-2,
SAT*, F-1 or S-1).
*When "L-2 SELECT" is set to "SAT" (
Z
pg. 36), "SAT"
appears instead of "L-2".