JVC XL-R2010BK manual Troubleshooting, Common, Player, Control, Remote

Troubleshooting

	Symptom	Cause	Remedial action/check	Ref
COMMON	No sound.	• A CD-R or CD-RW with nothing	• Replace the disc with one on which
		recorded on it has been inserted.	tracks have been recorded.
		(“BLANK DISC” is displayed.)
PLAYER	Play fails to start	• The CD has been inserted upside	• Insert it properly with the label side	10
		down.	facing up.
		• Condensation has formed on the	• Turn on the power and wait for a	2
		lens.	couple of hours.
CD
	Specific parts are not played properly.	• The CD is scratched.	• Replace the CD.	10
	Recording is not possible	• The CD-R or CD-RW was loaded in	• Load the disc with the label side up.	11
		the tray upside-down.
		• The CD-R or CD-RW is already	• Replace with a disc that can be	34
		finalized.	recorded on.
		• Further recording on a finalized CD-
CDR		RW is only possible if the Unfinalize
		function is used.
		• The source being copied is already a	• Perform analog recording of the	19
		digital copy itself.	source.
		• There is dust or scratches on the sur-	• Clean the disc using a commercially	19
		face of the disc.	available disc cleaner. If this is not
			effective, replace the disc.
CONTROL	No remote control operations.	• The dry batteries in the remote con-	• Replace them with two fresh batter-	8
		trol have discharged.	ies (AA (15F), R6, SUM-3).
		• The remote control sensor is	• Move the unit so that the sensor is	8
		exposed to direct sunlight or some	not exposed to direct sunlight, a
REMOTE
		other intense source of light.	lighting fixture or some other intense
			source of light.

If the unit fails to operate properly even when the remedial action suggested above has been taken:

This unit uses a microcomputer to perform a large number of operations. If it fails to operate no matter which button is pressed, disconnect the power cord, and then wait a few moments before re-connecting it. Then set the time and re-program the timer.

Notes

•If something important is going to be recorded, always test-record first to check that the recording turns out properly before proceeding with the actual recording.

•The manufacturer assumes no liability whatsoever for any damages resulting from missed opportunities or accidental erasure that occurs while conducting recording or play operations due to malfunctioning of or trouble in the unit, or for any incidental damage.

42