•Select “CD + LINE” to mix and record a CD loaded in the CD player with the signals from an external source via the LINE IN terminal.
•Select “CD + MIC” to mix and record a CD loaded in the CD player with the signals from a microphone plugged into the MIC jack.
•Select “LINE + MIC” to mix and record the signals from an external source connected via the LINE IN terminal and those from a microphone plugged into the MIC jack.
3 Press the ¶ REC/REC MUTING button (main
unit/remote control) to put the CDR in the recording pause mode.
•The remaining recording time on the disc is shown in the infor- mation display.
4 Press the MENU button (main unit/remote control) and select the sources for setting the recording level. Use the MULTI JOG/REC LEVEL and MIX BALANCE controls to adjust the recording level and mixing balance while playing the two sources. .
MULTI JOG / REC LEVEL
–+
MIX BLANCE | LINE | CD | MIX BLANCE | LINE | CD | |
MIC | LINE | MIC | LINE | |||
|
|
CD + LINE | CD recording level is | Line input recording |
| reduced. | level is reduced. |
|
|
|
CD + MIC | CD recording level is | MIC input recording |
| reduced. | level is reduced. |
|
|
|
LINE + MIC | Line input recording | MIC input recording |
| level is reduced. | level is reduced. |
•Adjust the recording level so that the 0 dB display of the level meter is not exceeded when the highest signal is applied.
•If the CD input is selected for mixed recording, the pitch con- trols may be used to adjust the speed of CD playback for mixing and recording purposes. (see page 15)
•If the microphone level is set too high, a loud howling sound may be emitted from the speakers. If this occurs, turn down the volume of the microphone by turning down the volume of the amplifier/receiver powering the speakers you are using to moni- tor the sound.
•When you have finished adjusting the recording level and the mix balance, set the sources back to the point where you want to start recording from.
5 Start playback of the sources to be recorded.
6 Press the CDR Control PLAY 3 button on the main unit or the 3 (play) button on the remote control to start recording.
To stop recording at any time
Press the CDR Control STOP 7 button on the main unit or the 7 (stop) button on the remote control. The Play 3 indicator in the display window will flash and operation stops.
31