6 Repeat Step 5 to program up to a maximum of
32steps.
•If you try to program over 32 steps, “MEMORY FULL” will be shown in the information display, and the programming func- tion ends automatically.
•Pressing the 7 (stop) button ends the programming function.
•Operation stops automatically when all of the programmed tracks have been played.
7 Press the 3 button to start program play.
•Operation stops automatically when all the programmed tracks have been played.
•During playback, track number and play time of the track are shown in the information display.
•The numbers of the tracks that have been played are cleared from the music calendar. They are displayed again when pro- grammed play is completed.
•If the 3 (play) button is pressed at a specific step in a program, the programming function will end and playback will start from Step 01, not the step currently shown in the information display.
To clear a step (track) from the program
To remove a programmed track, while in the CD stop mode, press the 4 (reverse skip) or ¢ (forward skip) buttons until the track you want to erase is shown in the information display. Press the CANCEL button to erase the track from the program. The step number for each track following the one erased is automatically reduced by one (i.e., steps are renumbered). To erase the entire pro- gram, press the CANCEL button until “PG NO PROGRAM” is shown in the information display.
To change the contents of the program
In the CD stop mode, press the SET button followed by the CAN- CEL button. Programmed tracks will be erased in the reverse order of when they were entered (starting from the last track pro- grammed). Press the CANCEL button twice to erase one track. Continue erasing in this manner until all of the tracks you wanted to remove are erased. Enter new tracks into the program by follow- ing programming Step 5.
To check the contents of the program
To check the tracks you have entered into the program, press the 7 (stop) button, and use the 4 (reverse skip) or ¢ (forward skip) buttons to review the programmed tracks. The program steps (PG S**) and track numbers will be shown in the information display one at a time as you toggle through the program (S: Step; **: step number).
To return to continuous playback
In the CD stop mode, repeatedly press the PLAY MODE button on the remote control until the total playing time is shown in the infor- mation display.
Remote Control
PLAY
MODE
18
