JVC XL-R2010BK manual Stop the CD to be recorded

•

1 Stop the CD to be recorded.

PLAY STOP

2 Load a recordable CD-R or CD-RW disc into the CDR and close the tray.

•The disc is read if required.

3 Press the CD REC button (main unit/remote control) to strart recording. “DISC DUBBING” is shown in the information display

•When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “DISC DUBBING”.

When “ADD FINALIZE?” is shown in the information window:

•No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote con- trol) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc unfinalized.

Note

•This message will not be shown if the menu FINALIZE func- tion setting is “OFF”. The default setting is “ON”.

The CD player and CDR start simultaneously. (This is called synchronized recording)

•Recording starts from the first track of the CD.

	Remaining play time of				Remaining recording time on
	track being recorded				CD-R or CD-RW
1	2	3	4	CD		REC C D - R
5	6	7	8	DIGITAL		SYNC	4X AUTO TRACK
9	10	11	12	44.1kHz		L–	40 30 20 10 6 3 0 dB
						R

•When a digital CD is recorded, its signals are recorded in their original form. Track marks are inserted automatically where one track changes to the next and track numbers change accordingly.

•As high-speed recording is performed (CD-R 4x, CD-RW 2x), there is no audio output during the recording process. When recording at normal speed, follow the procedure for “Setting the Unit for High-speed Recording” (see page 28) and start recording after setting the speed to normal speed. You can listen to the source while it is being recorded.

When the recording of the last song in the CD is complete, “STOP DUBBING” flashes and recording automatically stops.

When recorded without canceling “ADD FINALIZE?”

“FINALIZE” is shown in the information window after recording is stopped and finalization is automatically performed.

Checking a track number during recording

Press the DISPLAY button on the remote control.

Remote Control

DISPLAY

	CD-R or CD-RW
Track number	track number

To stop the recording at any time

Press the CDR or CD Control STOP 7 button on the main unit or the 7 (stop) button on the remote control. “STOP DUBBING” flashes in the information display, and the unit stops recording.

Notes

•There is no need to adjust the recording.

•If the source CD being recorded from the CD player is itself a first-generation digital copy, digital recording cannot be per- formed. When this occurs, the recording type will switch from digital to analog automatically.

•This type of recording cannot be started during CD playback. It must start from the beginning of the first track of the CD.

•When the CD REC button is pressed, the function is automati- cally switched to CD. This means that when the CD to be recorded has been selected, recording can proceed straightaway.

•Upon completion of recording, “STOP DUBBING” flashes in the information display. Always wait for the “STOP DUB- BING” message to be cleared before proceeding with the next operation.

•When you try to eject the disc from the CDR tray, “FINAL- IZE?” is shown in the information display When recording onto an unfinalized disc. To finalize the disc, press either the SET or FINALIZE button (main unit/remote control). To skip the final- ization process, press the OPEN/CLOSE 0 button one more time or the CANCEL button (main unit/remote control).

•Depending on the disc, the entire CD may not be recorded. In such a case, use the 1 Disc Dubbing feature (see page 24) to record.

Performing synchronized one-button recording of a single track

2

XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER

STANDBY OPEN/CLOSE REC SOURCE OPEN/CLOSE

DIGITAL CD LINE MIC

										–	+
STANDBY/ON
	PLAY MODE	CD EDIT	CD REC		SYNCHRO	MENU	SET	CANCEL
LEVEL	PHONES								MIX BLANCE	LINE	CD
				REC SOURCE						MIC	LINE
	STOP	PLAY	PAUSE	SELECTOR	FINALIZE	STOP	PLAY	PAUSE	REC/REC MUTING
MIN	MAX								MIC
	7 1			3

3				STANDBY/ON
	CD REC	CD EDIT	FINALIZE	DISPLAY
	1		2	3
	4		5	6
	7		8	9
	10	+10
	PLAY	REPEAT	C O N T R O L		1
	MODE		CD	CDR
	•REC		FADE	SYNCHRO
	REC MUTING
7					1
	SOURCE			MENU
	REC
		PITCH+
		SET
	PITCH 0	PITCH–
				CHAN
				CEL

RM–SXLR2010A REMOTE CONTROL

(To be continued on the next page)

23