JVC XL-R2010BK manual CD player to CDR Recording Options, Select and enter a track number

•If tracks have already been programmed for the CDs, “LAST P- PG OK?” is shown in the information display. Press the SET button on either the remote control or the main unit or press the PLAY button on the main unit to record the same programmed tracks.

Recording starts.

To program new tracks, press the CANCEL button and then proceed to step 4.

•If you press the CANCEL button, the playing time remaining time on the CD-R or CD-RW disc in the CDR is shown in the information display.

4 Select and enter a track number.

MULTI JOG / REC LEVEL

SET

–+

1. Select the track. 2. Enter the selection.

•After the track is entered, the amount of time remaining on the CD-R or CD-RW disc is shown in the information display.

5 Repeat Step 4 to continue programming tracks.

•Up to 32 steps can be programmed. The same track may be pro- grammed more than once.

•Programming ends when 32 steps have been registered or if there is no more time remaining on the CD-R or CD-RW.

6 Press the CDR Control PLAY 3 or ¶ REC/REC MUTING button on the main unit or the 3 (play) or ¶ REC/REC MUTING button on the remote control.

When “ADD FINALIZE?” is shown in the information window:

•No response (no input) assumes that finalization is to be per- formed, or you can press the SET button (main unit/remote con- trol) to confirm that finalization is to be done. Press the CANCEL button (main unit/remote control) to keep the disc unfinalized.

Note

•This message will not be shown if the menu FINALIZE func- tion setting is “OFF”. The default setting is “ON”.

•When a blank disc is in the CDR tray, "UPDATE OPC" is shown following "ADD FINALIZE?".

The recording process starts.

•Only the tracks selected from the CDs in the CD player are recorded.

•Playback starts from the first track seleted. The playing time of the track and the remaining playing time of the CD-R or CD- RW disc are shown in the information display.

•As high-speed recording is performed (CD-R 4x, CD-RW 2x), there is no audio output during the recording process.

When recording completes

"STOP DUBBING" flashes and recording automatically stops.

When recorded without canceling "ADD FINALIZE?"

"FINALIZE" is shown in the information window after recording is stopped and finalization is automatically performed.

To stop the recording at any time

Press the CD Control STOP 7, CDR Control STOP 7 or CANCEL button on the main unit or the 7 (stop) or CANCEL button on the remote control to stop the recording process. The recording mode is released after “STOP DUBBING” is shown in the information display.

CD player to CDR Recording Options

•There are a number of advantages of having a CD player and CDR in the same unit, mainly that the unit has direct control over both components. Because of this, the following recording options are available: normal dubbing, high-speed dubbing (4x for CD-R and 2x for CD-RW discs) and track spacing.

27