To disable/enable the Add Finalize feature with the remote control
1 Press the MENU button.
2 Press the 2 or 3 button to select "FINALIZE". 3 Press the SET button.
4 Press the 2 or 3 button to select "OFF" or "ON". 5 Press the SET button.
Analog recording level adjustment
When recording analog signals, and the main unit is recording or stopped in the recording pause mode, after pressing the MENU button on either the main unit or remote control, the recording level can be adjusted using the MULTI JOG control on the main unit. The recording level is shown in the information display as “REC LEVEL - **” (** is a value ranging from
When CD ANALOG recording is selected, the recording level is set automatically to the CD in the CD player.
To increase the recording level from LINE IN
When recording the sound from LINE IN, if the recording level is still low after adjustment of the analog recording level stated above, change "LINE IN GAIN" to "HIGH". "LINE IN GAIN" is set to "LOW" at the time of purchase.
Place the unit in the stop mode and follow the steps below.
1 Press the MENU button.
•"TRACK ERASE" is shown in the information display.
2 Turn the MULTI JOG to select "LINE IN GAIN". 3 Press the SET button.
•"LOW" is shown in the information display.
4 Turn the MULTI JOG to select "HIGH".
5 Press the SET button.
•The recording level further increases.
•- To change "LINE IN GAIN" back to "HIGH", follow steps 1 through 3 in the above procedure and select "LOW" in step 4.
To increase the recording level with the remote control
1 Press the MENU button.
2 Press the 2 or 3 button to select "LINE IN GAIN".
3 Press the SET button.
4 Press the 2 or 3 button to select "HIGH".
5 Press the SET button.
Sampling rate converter
The main unit is equipped with a sampling rate converter to ensure that the original digital signals will be recorded regardless of the sampling frequency (32kHz, 44.1kHz or 48kHz) of the signal from the source.
Microphone connections
Use a microphone equipped with a standard plug to connect to the
MIC jack on this unit.
Microphone purchased separately
MIC
OFF | ON |
6.3 mm diameter | • After connecting the |
standard plug | microphone to the unit, if it |
| has an ON/OFF switch, set it |
| to ON. |
Manual Recording
|
|
|
|
|
|
|
|
| 1 |
| 4 |
|
|
|
| CD/CDR MULTIPLE COMPACT DISC RECORDER |
|
|
|
|
| ||
| STANDBY |
|
|
| OPEN/CLOSE | REC SOURCE |
|
| OPEN/CLOSE |
|
|
|
|
|
|
| DIGITAL | CD LINE MIC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| – | + |
STANDBY/ON |
|
|
|
|
|
|
|
|
|
| |
| PLAY MODE | CD EDIT | CD REC |
|
| SYNCHRO | MENU | SET | CANCEL |
|
|
LEVEL | PHONES |
|
|
|
|
|
|
| MIX BLANCE | LINE | CD |
| STOP | PLAY | PAUSE | REC SOURCE |
| FINALIZE | STOP | PLAY | PAUSE REC/REC MUTING |
|
|
| SELECTOR |
|
|
|
MIN MAX |
|
| MIC |
6 | 2 | 5 | 3 |
1 Insert a recordable
Use the REC SOURCE SELECTOR button to select the recording source. Press the button repeatedly to toggle between sources. The source type will appear in the display window, and a lamp (DIGITAL, CD, LINE or MIC) will light on the front panel show- ing the selected source. The order of toggling and appearance of the sources in the information display (starting from DIGITAL IN) are as follows.
DIGITAL IN:
COAXIAL IN:
CD DIGITAL:
CD ANALOG*:
LINE IN:
MIC IN:
CD+LINE MIX**:
CD+MIC MIX**:
LINE+MIC MIX**:
Notes
•*In accordance with the SCMS (Serial Copy Management System), recording systems are not allowed to create a second- generation digital copy of a first generation copy (refer to SCMS see page 41). Therefore, if a
20