JVC XL-R2010BK Synchronized Recording from External Sources, Start playing of the source unit

4 Turn the MULTI JOG control or press the 2¥3

(menu) button on the remote control and choose the setting “TR SPACE ON” or “TR SPACE OFF”.

•Press the CANCEL button (main unit/remote control) to cancel the procedure and return to the normal display.

5 Press the SET button.

Notes

•There is no indicator to show the status of this function.

•This function will work when you begin recording from the recording pause mode except when performing synchronized one-button recording.

Synchronized Recording from External Sources

This unit offers the ability to record from various external sources to the CDR using synchronized START and START&STOP func- tions. This feature is applicable to external digital audio equipment connected via the DIGITAL IN OPTICAL and COAXIAL termi- nals and the LINE IN (REC) terminal.

1

XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER

STANDBY OPEN/CLOSE REC SOURCE OPEN/CLOSE

DIGITAL CD LINE MIC

										–	+
STANDBY/ON
	PLAY MODE	CD EDIT	CD REC		SYNCHRO	MENU	SET	CANCEL
LEVEL	PHONES								MIX BLANCE	LINE	CD
				REC SOURCE						MIC	LINE
	STOP	PLAY	PAUSE	SELECTOR	FINALIZE	STOP	PLAY	PAUSE	REC/REC MUTING
MIN	MAX								MIC
				2	3	7

				STANDBY/ON
	CD REC	CD EDIT	FINALIZE	DISPLAY
	1		2	3
	4		5	6
	7		8	9
	10	+10
	PLAY	REPEAT	C O N T R O L
	MODE		CD	CDR	3
	•REC		FADE	SYNCHRO
	REC MUTING
7
2	SOURCE			MENU
	REC
		PITCH+
		SET
	PITCH 0	PITCH–
				CHAN
				CEL

RM–SXLR2010A REMOTE CONTROL

•Synchronized recording to the CDR from an external source.

1 Load a recordable CD-R or CD-RW disc in the CDR tray.

•The disc is read if required.

2 Press the REC SOURCE SELECTOR button on the main unit or the REC SOURCE button on the remote control repeatedly to select the recording source.

•Each press of the selection button on either the main unit or remote control, toggles one step through the following source choices.

DIGITAL IN:	Record digital signals via the OPTI-
	CAL terminal.
COAXIAL IN:	Record via the COAXIAL terminal.
CD DIGITAL:	Record digital signals from CD player.
CD ANALOG:	Record analog signals from CD player.
LINE IN:	Record via the LINE IN terminal.
MIC IN:	Record via the MIC jack.
CD+LINE MIX:	Record via CD player and LINE mix.
CD+MIC MIX:	Record via CD player and MIC mix.
LINE+MIC MIX:	Record via LINE and MIC mix.

•Press REC SOURCE SELECTOR on the main unit or REC SOURCE button on the remote control to choose the proper ter- minal connection for the source to be recorded from (DIGITAL IN, COAXIAL IN or LINE IN).

•If DIGITAL IN or COAXIAL IN is selected, the LED lamp under DIGITAL IN selection will light.

3 Press the SYNCHRO button (main unit/remote control).

•The CDR is put into the synchronized recording pause mode.

•The source device must be stopped (cannot be playing) at this time.

4 Start playing of the source unit

Note

•When recording with the SYNCHRO button, recording starts when the input level is detected. If the track starts very quietly

(with a low input level), the beginning of the track may not be recorded. When recording from an analog source, such as records or tapes, recording may not start if the recording level is too low.

Performing synchronized recording of a digital source

•Recording is started based on the digital signal.

•Track marking is based on track information recorded in the digital signal. For digital sources other than CD, MD and DAT, track marking is based on silent track space.

Performing synchronized recording of an analog source

•Recording is started when the unit detects an audio signal.

•Track marking is based on silent track space which the unit interprets to be track breaks. If automatic track marking has been turned off, manual track marking is necessary during the recording process.

To stop recording at any time

Press the CDR Control STOP 7 button on the main unit or the 7 (stop) button on the remote control.

Note

•The signals from digital devices attached to the unit are not out- put to the DIGITAL OUT terminal of the unit.

29