JVC XL-R2010BK manual Listening Edit Recording, Selected tracks can be programmed and recorded

5 Press the SET button.

“DISC DUBBING” is shown in the information display.

•When a blank disc is in the CDR tray, “UPDATE OPC” is shown following “DISC DUBBING”.

The CD player and CDR start simultaneously.

•Recording starts from the first track of the CD.

When recording completes, “STOP DUBBING” flashes and recording automatically stops.

Notes

•Recording can only start if the total time of the tracks on the source disc is less than the time remaining on the disc being recorded to. If the track time on the source disc is longer, the message “SHORT REMAIN” is shown in the information dis- play and the dubbing function is ended.

•If a track on the source disc is of SCMS format, the message “SCMS PROTECT” is shown in the information display, and the dubbing function is ended.

•Do not finalize the disc.

Listening Edit Recording

Selected tracks can be programmed and recorded.

2

XL-R2010

CD/CDR MULTIPLE COMPACT DISC RECORDER

STANDBY

OPEN/CLOSE

REC SOURCE

OPEN/CLOSE

–

+

STANDBY/ON

PLAY MODE

CD EDIT

CD REC

SYNCHRO

MENU

SET

CANCEL

LEVEL

PHONES

MIX BLANCE

STOP

PLAY

PAUSE

REC SOURCE

FINALIZE

STOP

PLAY

PAUSE

REC/REC MUTING

SELECTOR

MIN

MAX

MIC

1 3

4

5 CANCEL

			STANDBY/ON	3
CD REC	CD EDIT	FINALIZE	DISPLAY
1		2	3
4		5	6
7		8	9
10	+10
PLAY	REPEAT	C O N T R O L
MODE		CD	CDR
•REC		FADE	SYNCHRO

5	REC MUTING
1

SOURCE	MENU
REC

PITCH+

SET

4	PITCH 0	PITCH–	CANCEL
		CA
		NCEL

RM–SXLR2010A REMOTE CONTROL

1 Stop the CD to be recorded.

2 Load a recordable CD-R or CD-RW in the CDR tray.

•The disc is read.

•The default setting is for the CD to be recorded digitally. If you press the REC SOURCE SELECTOR button and select CD ANALOG you can also record the CD using analog sound. You can listen to the source when recording using analog sound, but you cannot use high-speed recording.

•When recording SCMS (see page 41) discs, the disc is recorded using analog sound.

3 Press the CD EDIT button (main unit/remote control) to select the Listening Edit mode.

Main Unit Remote Control

CD EDIT

CD EDIT

“LISTEN EDIT” is shown in the information display for 3 seconds, the L EDIT edit recording indicator is shown in the display window.

•The CD tray of the CD player cannot be opened once the listen- ing edit mode is activated.

•If track have already been programmed for the CDs, “LAST L- PG OK?” is shown in the information display. Press the SET button on either the remote control or the main unit or press the PLAY button on the main unit to record the same programmed tracks.

Recording starts.

To program new tracks, press the CANCEL button and then proceed to step 4.

4 Program the tracks while the CD is playing by assigning a tag to each track on the disc.

•This is done by pressing either the SET button (main unit/ remote control) to add the track to the program or the CANCEL

button (main unit/remote control) to skip the track.

a. When the track now playing is to be recorded

SET

The track is stored in the memory, and operation moves on to the next track.

b. When the track is not to be recorded

CANCEL

The track is not stored in the memory, and operation moves on to the next track.

When the first track has been stored in memory

“1” is cleared from the music calendar.

	2	3	4	CD	L EDIT		CD - R
5	6	7	8	DIGITAL		SYNC	4X AUTO TRACK
9	10	11	12	44.1kHz		L–	40 30 20 10 6 3 0 dB
						R

Play time of second track	Recording time remaining on the
	CD-R/RW disc (pre-calculated)

After making the last programming choice, “START TO DUB?” is shown in the information display. Press the SET button (main unit/ remote control) to continue or the CANCEL button (main unit/ remote control) to end the function.

(To be continued on the next page)

25