JVC XL-R2010BK manual CD Playback Pitch Control, Disc Lock Function, Pitch+/Pitch

•

CD Playback Pitch Control

There are 3 CD pitch control buttons on the remote control that can be used to vary the speed of CD playback up to 12% faster or slower than the standard playback speed. This function can be use- ful in changing the pitch when adding vocals to a recording using the microphone input or when matching the playback speed of the CD with another source.

Note

•Pitch control cannot be used for the CDR.

To adjust the pitch of a CD during playback

To raise the pitch of CD playback (i.e., increase the speed of play- back), press PITCH+. Likewise, to lower the pitch of CD playback (i.e., slow down the speed of playback), press PITCH–.Each press of a button raises or lowers playback speed 1% (up to 12% max.).

	•REC	FADE SYNCHRO
	REC MUTING
	SOURCE	MENU
PITCH+/PITCH	REC
		PITCH+
PITCH 0		SET
	PITCH 0	CHANCE
		PITCH–
		L
	RM–SXLR2010A REMOTE CONTROL

•To restore the playback speed to normal, press PITCH 0.

•The adjusted playback speed can only be recorded using analog recording functions such as mixed recording.

•Even if the pitch has been adjusted, when digital synchronized recording is performed, the pitch is automatically restored to 0 before recording begins.

•The amount of pitch adjustment (+/-/0) is shown in the informa- tion display when one of the pitch buttons is pressed.

•When the speed of CD playback is changed using the pitch con- trol buttons, there is no signal output from the DIGITAL OUT OPTICAL terminal.

Disc Lock Function

The Disc Lock function can be used to make it impossible for chil- dren or anyone else to take CDs out of or load new ones into the CD player and CDR.

•When the power is on press the CD Control OPEN/CLOSE 0 button while holding down the CD Control STOP 7 button on the front panel. “TRAY LOCKED” will be shown in the infor- mation display for 3 seconds, after which it is no longer possi- ble to remove from or load CDs into the unit.

0

				XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
	STANDBY			OPEN/CLOSE	REC SOURCE				OPEN/CLOSE
				DIGITAL	CD LINE	MIC
										–	+
STANDBY/ON
	PLAY MODE	CD EDIT	CD REC			SYNCHRO	MENU	SET	CANCEL
LEVEL	PHONES								MIX BLANCE	LINE	CD
	STOP	PLAY	PAUSE	REC SOURCE		FINALIZE	STOP	PLAY	PAUSE REC/REC MUTING
				SELECTOR

MIN MAX	MIC
	7

To cancel the Disc Lock function.

Repeat the same step followed to lock the trays. “TRAY UNLOCKED” will be shown in the information display for 3 sec- onds, after which the Disc Lock function is canceled.

Note

The Disc Lock function is canceled if the AC power cord is unplugged from the wall outlet.

15