48

advanced features

Auto Satellite Programme Recording

Auto Record from Satellite Receiver

This facility allows a programme timer-recorded using the satellite receiver to be recorded on the VCR.

connect up Connect your satellite receiver, TV and VCR (see diagram below).

Outdoor

 

Unit

TV Aerial

Satellite Cable

Satellite Receiver

DECODER

VCR

TV

21-pin AV Input

ConnectorsAerial

(SCART)Connector

Back of TV

TV Aerial

Cable

ANT. IN

RF OUT

EXT.2EXT.1

Mains Outlet

Back of VCR

IMPORTANT

When you set L-2 SELECT to SAT ( pg. 51), it is possible to view a satellite broadcast with the TV set to its AV mode even if the VCR is turned off. When the VCR is in Stop mode or recording, press TV/VCR on the Remote Control to turn off the VCR indicator on the display panel.

If you turn on the VCR when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV/VCR on the Remote Control to set the VCR to the video mode.

NOTE:

Refer to the instructions supplied with your satellite receiver.

Page 48
Image 48
JVC HR-S6855EK, HR-S6856EK, HR-S6857EK manual Auto Satellite Programme Recording, Auto Record from Satellite Receiver