JVC HR-S8500E/EH specifications TimeScan Audio, Speed SP Speed LP Audio output

EN19

TimeScan

Names of special-effects playback

Speed SP

Speed LP

Audio output

Reverse

Forward

Search

Play

Slow-Motion

*Still

Slow-Motion

Play

Search

(Time Jog**)

(Time Jog**)

-9x

-7x

-5x

-3x

-1x

-1/2x

0

1/2x

1x

1.5x

2x

3x

5x

7x

9x

-7x

-3x

-1/2x

0

1/2x

1x

1.5x

2x

5x

9x

Audio is output.

Audio is not

Audio is

Audio is

Audio is output.

output.

output.

output.

**Still mode cannot be engaged using the remote control's Þor%button. Still mode can be engaged by

pressing the PAUSE button. In the Still mode, the TIME JOG & SCAN indicator does not light even though you can hear TimeScan audio.

**Smooth slow motion delivering an uninterrupted moving image without distortion.

●The recorder's TIME JOG & SCAN indicator lights during TimeScan.

●The speed is shown during TimeScan in the upper right corner of the TV screen for approx. 5 seconds. (The display may be distorted.)

●To resume normal playback, press PLAY.

●When using the recorder's TIME SCAN SHUTTLE ring, the playback speed may not change in the correct step if it is turned too fast.

●Picture and audio may become distorted when the recording speed changes. When this happens, resume normal playback once, and then try using TimeScan again.

●The picture may be noisy or there may be a loss of colour when you change the playback speed. (More noise will appear with LP recordings.)

●Noise may appear or the upper part of the picture may be distorted during still, frame-by-frame playback, 2x search of LP recordings, or depending on the tape being used.

●Picture may appear distorted in comparison to normal playback.

●When normal playback resumes from search (including TimeScan), still, slow motion or frame-by-frame playback, the picture may jitter vertically momentarily depending on the type of TV being used.

●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.

●TimeScan sound quality will differ in comparison to normal playback.

●When material such as music videos where there is non-stop sound (very few breaks in the soundtrack) are viewed at 1.5x or 2x normal speed, the audio playback may be faster than normal.

●Depending on the type of tape contents, the sound may not be clear during forward slow-motion playback.

●Time Jog cannot be activated by pressing PAUSE for longer than 2 seconds.

●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.

●Picture will be monochrome with an LP-recorded MESECAM tape during TimeScan.

●When playing back an NTSC tape, the speeds differ from those listed above and are not shown on the TV screen, and the TIME JOG & SCAN indicator does not light.

Also, depending on the type of tape being used, the picture may be distorted and there may be a loss of colour even when in the TimeScan mode.

●TimeScan at -1/2x, 1/2x and 1.5x normal speed are not possible with a MESECAM tape.

If you don't want to hear TimeScan audio, set "TIME SCAN AUDIO" to "OFF" (See below).

TimeScan Audio

The audio output can be set ON/OFF during TimeScan. Select ON/OFF as required. * The default setting is "ON".

1Press MENU to access the Main Menu screen.

2 Move the highlight bar (pointer) to "MODE SET" by pressing %Þ, then press OK or %.

3Move the highlight bar (pointer) to "TIME SCAN AUDIO" by pressing %Þ, then press OK or

4 Press MENU to return to the normal screen.

%

to select "ON" or "OFF".

HR-S8500E				HR-S8500EH
MODE SET		PREVIOUS PAGE		MODE SET		PREVIOUS PAGE
AUTO TIMER	OFF	EDIT	OFF	AUTO TIMER	OFF	AV2 SELECT	VIDEO
O. S. D.	ON	AV2 SELECT	VIDEO	O. S. D.	ON	COLOUR SYSTEM PAL/NTSC
B. E. S. T.	ON	COLOUR SYSTEM PAL/NTSC		B. E. S. T.	ON	TIME SCAN AUDIO	ON
AUTO SP=LP TIMER	OFF	TIME SCAN AUDIO	ON	AUTO SP=LP TIMER	OFF
DIGITAL 3R	ON			DIGITAL 3R	ON
POWER SAVE	OFF			S-VHS	AUTO
S-VHS	AUTO			EDIT	OFF
NEXT PAGE				NEXT PAGE
[5°] =		[5°] =		[5°] =		[5°] =
[MENU] : EXIT		[MENU] : EXIT		[MENU] : EXIT		[MENU] : EXIT