JVC HR-S8500E/EH Remote Control Functions, Remove Power Supply, SET Remote Control Code

SPECIALFEATURES

EN33

Remote

Control

Functions

VCR

– –:– –

NUMBER "1"	1	2	3
			2
	4	5	6
	"2"	8	9
	7
	NUMBER	0
	X		4

1

STOP

	3
T	+
V
–	V
	T
	TV PROG –

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL

CODE

2 While holding down VCR on the remote control, press the NUMBER key "2" and then press STOP.

RE-SUPPLY POWER

3 Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

4 Press on the remote control. The recorder will now only respond to B code signals.

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.