JVC HR-XV1EU Manual TV station presetting, To skip a channel position, Fine Tuning adjustment

Manual TV station presetting

The Fine Tuning adjustment

Under a normal receiving condition, the station-search will stops automatically at the best receiving position. That picture will appear without disturbance.

This receiving position will be memorized automatically. The Fine Tuning can not be memorized additionally.

In rare case of bad receiving condition, the station-search might not stop at the best receiving position. That picture will appear with disturbance, e.g. waving lines.

Only in this rare case, use the Fine Tuning to tune the concerned station manually and exactly.

In step 5, press or until the station is adjusted to best position. Then press OK.

5

6

Please wait until OK: ENTER appears. It may take a few seconds.

Then press OK.

In the next step, the program position on which this station should be stored will be set.

Press or repeatedly until "5" displayed.

Or enter 5 with number keys. Then press OK.

VPS CH 1

SAT1

DEC

SELECT : / F. TUNE :

OK : OK EXIT : MENU

		VPS CH 5
		SAT1
DEC OFF
CH	:	/ 0–9
OK	: OK	EXIT : MENU

7 Repeat the steps 3 and 6 to preset other TV stations.

8 Press SET UP MENU repeatedly until the TV picture appears on the screen.

To skip a channel position

Unwanted channels can be skipped so that they cannot be called

up by pressing PR. Select the channel to be skipped...

VPS CH 29

SWF

Note:

Even the skipped program position can be called up with number keys.

VCR

....e.g. channel 29.

Select channel 29, then press CANCEL.

This channel’s number will be flashing. That way you can cancel further channels one after the other.

To cancel the channel skipping

Select the skipped channel using number keys, then press CANCEL. The channel No. does not blink any longer, and the channel No. now may be selected again using PR.

21