JVC HR-XV1EU manual Special playback/Playback sharpness/Skip Search

Special playback/Playback sharpness/Skip Search

Special playback

Picture Search

Reverse picture search function

Press x 1 or x 2 during the playback.

Forward picture search function

Press x 1 or x 2 during the playback.

To return to playback: Press .

Still Picture

Press 4 during playback. To resume normal

playback: Press .

VCR

Slow Motion

During playback press SLOW.

You can change the slow speed by the additional

pressing of SLOW.
		VCR
To return to playback: Press	.

Slow tracking and vertical lock adjustment

Playback sharpness

Adjust the sharpness of playback picture during playback. During slow motion, still picture and picture search, sharpness-adjusting is impossible.

1 Start the playback of video tape.

2 Press SET UP MENU.	ATS (AUTO TUNING SYSTEM)
Press or to select	TIMER REC SET
VCR SETUP. Then press
	VCR EXTENSION
OK.	VCR SETUP
	CHANNEL SETUP
	SYSTEM SETUP

SELECT	:
ENTER	: OK
EXIT	: MENU

3 Press or to select	VCR SETUP
SHARPNESS. Then		NICAM	[AUTO]
press OK.
		AUDIO MIX	[OFF]
		SHARPNESS

If noise bars appear in the picture during slow motion, press the SET + or – to reduce the noise bars.

If the still picture jitters excessively, press SET + or – to stabilize the still picture.

Frame by Frame picture

During playback, press 4 one by one: The picture

advances frame by frame.

VCR

To return to playback: Press .

Adjusting tracking condition

4 "SHARPNESS" will appear and then disappear after 60 seconds of the last button-press. Adjust with sharper or lesser.

SELECT :

ENTER : OK

CSEXITHARPNESNTRE+––:CANCEL:+SMENU––+––EXIT+––:MENU2

Automatic tracking adjustment

Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during playback, press SET + or SET – to eliminate the noises. “MANUAL TR.” will appear. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment.

To return to automatic tracking, press A. TRK.

Notes:

•The audio output is muted during SPEED SEARCH, STILL, FRAME ADVANCE and SLOW MOTION.

•During picture search mode there will be noise bars which are caused by the system.

•The Special Playback will automatically change to playback after approx. 5 minutes to protect the video tape against excessive wear.

24

softer sharper

5 Press SET UP MENU repeatedly until the TV picture appears on the screen.

Note:

To return to the initial sharpness setting, press CANCEL while the sharpness setting screen is appearing.

Skip Search

Each time you press SKIP SEARCH while a tape is playing, the unit will fast-forward ahead approx. 30 seconds on the tape. You may press the button up to six times in a row to move approx. 180 seconds (three minutes) ahead.

For example: 1 press: approx. 30 seconds of tape 2 presses: approx. 60 seconds of tape 3 presses: approx. 90 seconds of tape