JVC HR-XV1EU manual Audio Mixing, Press or to select VCR SETUP. Then press, Audio MIX

Audio Mixing

When playing audio dubbed video tapes, press A.MONITOR to select the sound you want to listen to. Press A.MONITOR repeatedly until "MONO" is displayed on the screen to listen only to the dubbed sound. In case of the other on-screen indications only the

Preparation:

•Turn ON the TV and set to the video input mode.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light)

original sound will be output. It is also possible to listen to the dubbed and the original sounds simultaneously. To accomplish this, set "AUDIO MIX" to "[ON]" (see right). During playback, press A.MONITOR repeatedly until "STEREO" is displayed on the screen.

1 Press SET UP MENU.

Press or to select VCR SETUP. Then press

OK.

2 Press or to select

AUDIO MIX.

3 Press[ON]. / or OK to select If you select "[ON]", you can listen to the dubbed and the original sounds at the same time.

ATS (AUTO TUNING SYSTEM)

TIMER REC SET

VCR EXTENSION

VCR SETUP

CHANNEL SETUP

SYSTEM SETUP

SELECT :

ENTER : OK

EXIT : MENU

VCR SETUP
		NICAM		[AUTO]
		AUDIO MIX		[OFF]
		SHARPNESS
SELECT :				/
ENTER			: OK
EXIT			: MENU
VCR SETUP
		NICAM		[AUTO]
		AUDIO MIX		[ON]
		SHARPNESS
	SELECT :			/
	ENTER		: OK
	EXIT		: MENU

Note:

To deactivate the AUDIO MIX function follow the above procedure from step 1 to 3, select "[OFF]", and confirm the setting by pressing SET UP MENU.

4 Press SET UP MENU repeatedly until the TV picture appears.

38