JVC HR-XV1EU manual Counter Display, Zero Return function, DISPLAY-button, Stereo ZDF

Counter Display

ZERO RETURN function

This function makes tape-rewinding stop at the counter 00:00:00 position automatically.

Preparation:

•Turn ON the TV and set to the video input mode.

•Make sure TV/VCR/DVD switch has been slided to VCR/DVD.Then press VCR to select the VCR mode. (The VCR indicator will light)

1 Press OSD.

The counter display shows the tape running time during playback or recording.

The Recorder will indicate REC during recording for itself.

VCR

2 Press C.RESET at the desired tape position.

The counter display will be reset to the "00:00:00" position (e.g. the beginning of recording).

12:00 SUN	CH 2
STEREO	ZDF

00:04:38 SP

12:00 SUN	CH 2
STEREO	ZDF

Note:

•When you load a video cassette, the dis- play indication changes to "00:00".

•The counter display does not function on non-recorded (blank) sections of the tape. When you rewind, fast forward or play tapes through blank sections, the counter display stops.

VCR 00:00:00 SP

3 Press 3 when playback or recording is finished. Press ZERO RETURN.

The tape will be rewinded or fast forwarded and automatically stop at the ”00:00:00” position.

4 Press OSD once again to make the all indicator disappear.

The DISPLAY-button

Press DISPLAY during the playback. The clock andVCR tape counter alternate with each other in the display.

VCR

Note:

You can set the tape counter to 00:00:00 with C.RESET anytime. Therefore, the counter display can also indicate 00:00:00, even when the tape counter does not reach its beginning yet. Even if the tape counter indicates 00:00:00, it can be rewinded moreover. If the tape was rewinded over the point of 00:00:00, the minus mark (–) appears in the counter display. Although the tape counter seems to forward when you press , in fact the tape is being rewinded. When the tape reaches the beginning, the tape-rewinding stops automatically.

26