Index number

EN 21

Playback Features

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch on the remote control to the right.

ATTENTION

In the search, still, slow-motion or frame-by-frame playback mode,●the picture will be distorted.●the noise bars will appear.●there may be a loss of colour.●you cannot hear the sound.Still Picture/Frame-By-Frame Playback1Pause during playback.

Press 9.

●If there is vertical jitter, press PR +/– on the remote control to correct the picture.

2Activate frame-by-frame playback.

Press 9.

NOTE:

Still picture playback stops automatically after 5 minutes to protect the heads.

Slow Motion

While playback is paused, press and hold 9 for 2 seconds, then release. Press 9 and release again to return to still picture.

NOTE:

During slow motion playback, some noise may appear on the TV screen. Press PR + or – on the remote control to eliminate the noises.

Variable Speed Search

During playback, press 5 for forward variable speed search, or 3 for reverse variable speed search.

●The speed changes for each direction by pressing 3 or 5repeatedly.When pressing 5: +5x{+7x/ NTSC-EP +11x{+21xWhen pressing 3:–1x]–5x{–7x/ NTSC-EP –1x]–11x{–21x

(Once 3 is pressed, reverse search starts in –1x normal playback speed. After this process, each press of 3changes the search speed between –5x and –7x/NTSC-EP -11x and -21x.)

NOTE:

The search speed changes in the same way for SP, LP, and EP modes.
Skip SearchDuring playback, press 1 to 6 times to skip over unwanted sections.

Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically.

To resume normal playback during a Skip Search, press 4.Index Search

Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the unit is in the Stop mode.Activate Index Search.

Press 2 or 6. “2 1” or “6 1” is displayed on the TV screen and search begins in the corresponding direction.

● To access index codes 2Current position
through 9, press 2 or

 

 

 

 

6 repeatedly until the

 

 

 

 

correct index number is

 

 

displayed.

 

 

Example:

To locate the beginning of B from the current position, press 2 twice.To locate the beginning ofD from the current position, press 6 once.●When the specified index code is located, playback begins automatically.Next Function Memory

The Next Function Memory “tells” the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode.

a- For Automatic Start Of PlaybackPress 3, then press 4 within 2 seconds. b- For Automatic Power OffPress 3, then press 1 within 2 seconds. c- For Automatic Timer StandbyPress 3, then press # within 2 seconds.

d- For Automatic Cassette Ejection After Tape Rewind Press 3, then press x within 2 seconds.

One Touch Replay

Press

during playback.

 

Pressing

once moves the playback position back to about 7

seconds before the current position. You can pressup to 4
times each One Touch Replay.

 

To resume normal playback, press 4.