EN 23

Basic Recording

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch on the remote control to the right.

Slide to the right.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The unit’s power comes on automatically and the counter is reset to 0:00:00.

●Select the appropriate colour system with “PAL/MESECAM” and “NTSC” ( pg. 54).

B Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

C Choose a programme.
D Set the tape speed.

Press p. The current setting appears on the front display panel or TV screen. Press p again to change the setting while the tape speed is displayed on the TV screen.

●Each time you press p, the mode changes as follows. SP{LP (or EP*)*EP is for NTSC only.E Start recording.Press and hold 7 and press 4 on the remote control, or press 7 on the unit.

B.E.S.T. works at the beginning of both the first SP and the first LP recording after inserting the cassette. ( pg. 25)

F Pause/Resume recording.Press 9. Press 4 to resume recording.●You can select channel during the Record Pause mode.G Stop recording.

Press 8. Then press x on the VHS deck to remove the cassette.

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording, or timer recording ( pg. 24, 29), the recording will resume automatically when power is restored to the unit unless the unit’s memory backup has expired.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later,

cover the hole with adhesive tape. Record safety tab
Press PR +/– or the number keys to select the channel you wish to record.