22 EN

OPERATIONS ON VHS DECK (cont.)

Slide to the right.

Instant ReView

Simply by pressing a single button, the unit power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the unit is off and that the Timer mode is disengaged.

Activate Instant ReView.

Press . The unit power comes on and the unit searches for the index code indicating the start of the last timer-recorded programme. Once it’s found, playback begins automatically.

To watch the first of the 3 programmes, press three times. The unit searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

Repeat Playback

Your unit can automatically play back the whole tape 100 times repeatedly.1Start playback.

Press 4.

2Activate Repeat Playback.Press 4 and hold for over 5 seconds, then release.The Play indicator ($) on the front display panel blinks slowly.After playing back a tape 100 times, the unit stops automatically.3Stop Repeat Playback.Press 8 at any time.Pressing 4, 3, 5 or 9 also stops Repeat Playback.

NOTE:

Manual Tracking

Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TRACKING +/– buttons.

1 Override automatic tracking.During playback, press TRACKING + and at the same time.2Adjust the tracking manually.Press TRACKING +/–.Press TRACKING + and at the same time again to return to automatic tracking.

NOTE:

When a new tape is inserted, the unit enters the automatic tracking mode automatically.

Soundtrack Selection

Your unit is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.

During PlaybackPressing A.MONITOR changes the soundtrack as follows:
TRACKUSE

 

On-Screen Display

 

 

 

HI FIFor Hi-Fi stereo tapes
L j h R

 

 

 

HI FI

For main audio of Bilingual tapes
L j

 

 

 

HI FI

For sub audio of Bilingual tapes
h R

 

 

 

NORMFor audio-dubbed tapes

 

 

HI FI

For audio-dubbed tapes

NORM

 

 

 

NOTES:

“HIFI L j h R” should normally be selected. In this mode, Hi-Fi stereo tapes are played back in stereo, and the normal audio track is played back automatically for tapes with only normal audio.

For instructions on recording stereo and bilingual programmes, refer to page 25.

“O.S.D.” must be set to “ON” or the on-screen displays will not appear. ( pg. 54)

Repeat playback is not possible with a cassette recorded in EP mode.