EN 57
* The default setting is bold in the table below.
Picture Settings8MONITOR TYPE —
16:9 NORMAL/16:9 MULTI NORMAL / 16:9 AUTO/16:9 MULTI AUTO /
4:3 LB/4:3 MULTI LB /
4:3 PS/4:3 MULTI PS
You can select the monitor type depending on the TV used when you play back DVD VIDEO discs recorded for
8PICTURE SOURCE —
VIDEO (NORMAL) / VIDEO (ACTIVE) / FILM / AUTO
You can obtain optimal picture quality by selecting whether the content on the disc is processed by field (video source) or by frame (film source).
Normally set to “AUTO.”
VIDEO (NORMAL): Suitable for playing back a video source disc with relatively a few movements.
VIDEO (ACTIVE): Suitable for playing back a video source disc with relatively a lot of movements.
FILM: Suitable for playing back a film or progressive source disc.
AUTO: Used to play back a disc containing both video and film source materials. This unit recognizes the picture type (film or video source) of the current disc according to the disc information.
●If the playback picture is unclear or noisy, or the oblique lines of the picture are rough, try to change to other modes.
8SCREEN SAVER — ON / OFF
The TV screen may be burned out if a static picture is displayed for a long time. When this function is set to “ON,” the unit automatically activates the screen saver function if a static picture, such as an
NOTE:
This function is not available for Audio CDs and MP3 discs.
8FILE TYPE — AUDIO / STILL PICTURE
You can select files to play back, when both MP3 files and JPEG files are recorded on a disc.
AUDIO: Select this to play back MP3 files.
STILL PICTURE: Select this to play back JPEG files.
NOTE:
You cannot access the DVD Set Up screen and “X” appears on the TV screen if a disc is already placed.
8DIGITAL AUDIO OUTPUT —
PCM ONLY / DOLBY DIGITAL/PCM / STREAM/PCM
Set to the appropriate mode according to the type of the device connected to DIGITAL AUDIO OUT connector on the rear of unit.
Set this item correctly according to the logo on the device.
It is not necessary to set this mode when you connect no device to the DIGITAL AUDIO OUT connector.
PCM ONLY: Select this when connecting to a device bearing neither Dolby Digital nor DTS logo, or a digital recorder.
DOLBY DIGITAL/PCM: Select this when connecting an amplifier or a decoder bearing Dolby Digital (without DTS) logo.
STREAM/PCM: Select this when connecting an amplifier or a decoder bearing both Dolby Digital and DTS logos.
8ANALOG DOWNMIX — DOLBY SURROUND / STEREO
Set to the appropriate mode according to your audio system when you play back a DVD VIDEO disc recorded with surround multichannel audio. This setting affects only the analogue audio output signal from the AUDIO OUT connectors when playing back a DVD VIDEO disc recorded with surround multichannel audio.
DOLBY SURROUND: Select this when you enjoy multichannel surround audio by connecting the unit’s analogue AUDIO OUTPUT connectors (DVD) to a surround decoder or an internal amplifier.
STEREO: Select this when you enjoy conventional
8D. RANGE CONTROL —
WIDE RANGE / NORMAL / TV MODE
The dynamic range (the difference between the loudest sound and the quietest one) can be compressed during playback of a programme encoded in Dolby Digital format.
This function takes effect when a DVD VIDEO disc recorded in Dolby Digital format is played back at low or middle volume. WIDE RANGE: Select this to inactivate this function when you
enjoy wide dynamic range programme.
NORMAL: Normally select this setting to activate this function.
TV MODE: Select this when you hear the sound through the TV's speaker(s).
8OUTPUT LEVEL — STANDARD / LOW
You can lower the output level of analog audio to accommodate the unit to the connected A/V equipment.