JVC HR-XV38SAG, HR-XV38SAS B Perform tuning, B Select the TV system, C Return to the normal screen, C Return to the normal screen, A Select the channel to fine-tune, twice, three times

EN 63

Fine Tuning Channels Already Stored

Perform steps A to C of “Manual Channel Set” on page 61 to access the channel list screen before continuing.

A Select the channel to fine-tune.

TV System Selection — When you see the picture but the audio can’t be heard or sounds unnatural

Perform steps A and C of “Manual Channel Set” on page 61 to access the Channel List screen before continuing.

Press rt until the channel you want to tune begins blinking, then press ENTER twice.

●The ”FRQ” number for the channel starts blinking.

B Perform tuning.Press rt until the picture is its clearest. Then press ENTER or e.

●Repeat steps A and B as necessary.

C Return to the normal screen.

Press SET UP.

A Select the channel.

Press rtuntil the channel you want to change its TV system begins blinking, then press ENTER three times.

●The “SYS” display for that channel starts blinking.

CH	FRQ	SYS	CH	FRQ	SYS
01	150	BG	07	229	BG
02	165	BG	08	237	BG
03	195	BG	09	355	BG
04	205	BG	10	365	BG
05	213	BG	11	374	BG
06	221	BG	12	384	BG
[	] : SELECT SYSTEM

[ENTER] : OK

[SET UP] : EXIT

B Select the TV system.

Press rt to select the appropriate TV system (B/G]D/K]I). Then press ENTER or e.

●Repeat steps A and B as necessary.

C Return to the normal screen.

Press SET UP.