68 EN

TROUBLESHOOTING (cont.)
Changing audio/subtitle language is not possible.●The disc does not contain audio/subtitles in multiple languages.]With some discs, the language should be set on the top menu. ( pg. 34)The subtitles do not appear on the TV screen.●The disc does not contain subtitles.●The subtitle display is set to off.]Set the subtitles display to on. ( pg. 37)●A-B Repeat Playback is in progress. ( pg. 44)]The subtitles recorded around point A-B may not appear.Angle cannot be changed.●The scene is not recorded from multiple angles.MP3/JPEG Files Playback (DVD deck)A disc cannot be played.●No MP3 files or JPEG files are recorded to the disc.]Replace to the disc with MP3 files or JPEG files are recorded.

●Files do not have the correct file extension in their file names. ]Add correct file extension to their file names.

●Files are not recorded in a format compliant with ISO 9660Level 1 or 2.]Replace the disc. (Record files using a compliant application.)●The types of files other than MP3 or JPEG are recorded to the

disc.

]The disc which contains the types of files other than MP3 or JPEG may not be played because of its disc characteristics or recording conditions.

When playing back a disc which contains both MP3 files and JPEG files, either MP3 files or JPEG files are played.

●When playing back a disc which contains both MP3 files and JPEG files, the selected files in the “FILE TYPE” setting are played back .

]Set “FILE TYPE” to either “AUDIO” (for MP3 files) or “STILL PICTURE” (for JPEG files) which you want to play back beforehand. ( pg. 57)

The control display appears on the TV screen, but no operation can be performed.

●No MP3 files or JPEG files are recorded to the disc, or the disc is an unplayable disc (such as CD-ROM).

]Replace the disc.
Recording (VHS deck)Recording cannot be started.

●There is no cassette loaded, or the cassette loaded has had its record safety tab removed.

]Insert a cassette, or using adhesive tape, cover the hole where the tab was removed.

TV broadcasts cannot be recorded.●“L-1” or “F-1” has been selected as the input mode. ]Set to the desired channel.Tape-to-tape editing is not possible.

●The source (another video recorder, camcorder) has not been properly connected.

]Confirm that the source is properly connected.

●All necessary power switches have not been turned on. ]Confirm that all units’ power switches are turned on.

●The input mode is not correct.]Set the input mode to “L-1” or “F-1.”Camcorder recording is not possible.

●The camcorder has not been properly connected. ]Confirm that the camcorder is properly connected.

●The input mode is not correct.

]Set the input mode to “L-1” or “F-1.”

“” and “” on the front display panel won’t stop blinking.●The end of the tape was reached during recording.

]The programme may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire programme.

The channel cannot be changed.●Recording is in progress.

]Press 9 to pause the recording, change channels, then press 4 to resume recording.