G-CODE/SHOWVIEW SETUP

28 EN

OPERATIONS ON VHS DECK (cont.)

F Return to the normal screen.

Press PROG or ENTER. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen, see page 28.

●Repeat steps B – F for each additional programme.G Engage the unit’s timer mode.

Press #. The unit turns off automatically and “#” appears on the front display panel.

●To disengage the timer mode, press # again.

NOTES:

●To Change The Stop Time:

—press STOP +/– after pressing ENTER in step D. You can compensate for anticipated programme schedule delays.

●To Timer-Record Weekly Or Daily Serials:

—after pressing ENTER in step D, press WEEKLY (number key “9”) for weekly serials or DAILY (number key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●You can programme this unit to timer-record as many as 8 programmes. If you try to programme the unit to record a ninth, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes. ( pg. 30)

ATTENTION

Guide Program Number Set“G-CODE/SHOWVIEWSETUP” appears afterperforming step D if the Guide Program
number for the G-CODE

GUIDE PROG

 

 

TV PROG

number you entered has not

2

 

 

– –

 

 

 

 

been set.

 

 

 

 

Press rtor the number keys

 

 

 

 

[0-9] OR [ /

]

 

 

to input the channel position

[PROG] : EXIT

 

 

 

number on which your unit

 

 

 

 

receives that station, then

 

 

 

 

press ENTER or e to set the Guide Program number. The G-CODEProgram screen appears.