Manuals / Brands / TV and Video / DVD Player / JVC / TV and Video / DVD Player

JVC HR-XV38SAG, HR-XV38SAS 52 EN, Make connections, NOTES:, CAUTIONS:, SYSTEM CONNECTIONS (cont.), DIGITAL AUDIO OUT, To DIGITAL AUDIO input, Optical cable (not provided)

1 72

Download 72 pages, 4.03 Mb

52 EN

SYSTEM CONNECTIONS (cont.)

Connecting To A Dolby Digital Decoder or An Amplifier With A Built-in DTS (DVD deck)

These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with built-in DTS.

Make connections.

Connect the optical cable between the unit and the Dolby Digital Decoder or amplifier with a built-in DTS.

Dolby Digital Decoder or amplifier with built-in DTSTo DIGITAL AUDIO input

Optical cable (not provided)

DIGITAL AUDIO OUT

Note for connection:

Remove the connector cover from the unit and remove the protection cap from the cable.

NOTES:

●For Dolby Digital sound, set “DIGITAL AUDIO OUTPUT” to “DOLBY DIGITAL/PCM”. ( pg. 57)

●For DTS sound, set “DIGITAL AUDIO OUTPUT” to “STREAM/ PCM”. ( pg. 57)CAUTIONS:

●This unit has a dynamic range of more than 80 dB with regards to its Hi-Fi audio capability. It is recommended that you check the maximum level if you are going to listen to the Hi-Fi audio signals through a stereo amplifier. A sudden surge in the input level to the speakers may damage them.

●Some speakers and televisions are specially shielded to prevent television interference. If both are of the non-shielded type, do not place the speakers adjacent to the TV set as this can adversely affect the video playback picture.

Contents

Page 2 EN POWER SYSTEM: This set operates on voltage of AC110 – 240 V~ (Rating), AC90 –260 V ~ (Operating), 50Hz/60Hz with automatic switching 1.DO NOTplace the unit — Contents SAFETY FIRST DISC INFORMATION INDEX INSTALLING YOUR NEW UNIT 4 EN File Structure of Discs DVD VIDEO Audio CD/Video CD NOTE: Video CD discs that support Playback Control (PBC) 6 EN FRONT DISPLAY PANEL A Operation Mode Indicator C Progressive Mode Indicator pg B Channel/Clock Display D “Timer ” Indicator pg. 28, 29 8 EN INSTALLING YOUR NEW UNIT 10 EN Scan Mode Set ●Refer also to the instruction manuals supplied with your TV •480p indicates 480 scanning lines with progressive format •480i indicates 480 scanning lines with interlaced format ●Turn on the TV and select the VCR channel (or AV mode) 12 EN INITIAL SETTINGS Set the TV system 14 EN 8MONITOR TYPE 4:3 PS / 4:3 MULTI PS (Pan&Scan): 16 EN On-screenLanguage Set (DVD deck) Menu/Audio/Subtitle Language Set language setting manually as required set the default language as you like Turn on the unit 18 EN Language Code List Clock Set C Access the Main Menu screen, then Initial Set screen D Access the Clock Set screen E Set the date and time F Start the clock operation 20 EN Index number Still Picture/Frame-By-FramePlayback 1Pause during playback If there is vertical jitter, press Slow Motion Variable Speed Search ●The speed changes for each direction by pressing 3 or repeatedly When pressing 5: +5x{+7x/ NTSC-EP+11x{+21x 22 EN Basic Recording C Choose a programme D Set the tape speed ●Each time you press p, the mode changes as follows. SP{LP (or EP*) *EP is for NTSC only 24 EN Record One Programme While Watching Another Elapsed Recording Time Indication Receiving Stereo and Bilingual Programmes Type of Broadcast Being B.E.S.T. Picture System Playback The unit assesses the quality of the tape once you initiate playback Recording The unit assesses the quality of the tape once you initiate recording 26 EN Timer Programming B Access the G-CODE/SHOWVIEW screen Press PROG PROG C Enter the G-CODE number 28 EN Express Timer Programming Before performing Express Timer Programming: C Access the Programme screen Press START +/–.(If you’re just starting out, “P1” appears.) 30 EN To cancel or change a programme C Cancel or change programme setting To cancel a programme press the appropriate button: When programmes overlap each other Example: Programme 1 (you have just made) and Programme 4 overlap each other A Confirm the overlapping programmes Overlapping programmes blink on the TV screen B Select the programme to modify 32 EN OPERATIONS ON DVD DECK 34 EN Locating the Start Point of the Item or Skip the Item Press 2 or 6 during playback To locate the beginning of item B from the current position, press 2twice To locate the beginning of item D from the current position, press 6 once 36 EN Subtitle Selection 38 EN 1/3]2/3]3/3](Back to the beginning) 1/3 ENGLISH]2/3 FRENCH]3/3 SPANISH](Back to the beginning) ST]L]R](Back to the beginning) ST 1]ST 2]L 1]R 1]L 2]R 2](Back to the beginning) OFF]ACTION]DRAMA]THEATER](Back to the beginning) ACTION: DRAMA: THEATER: NORMAL]CINEMA]USER 1]USER 2](Back to the beginning) 40 EN Menu Bar Functions for DVD VIDEO 8Time mode selection ●TOTAL: Current title elapsed time ●T.REM: Current title remaining time ●TIME: Current chapter elapsed time 42 EN Basic Playback C Select the group Press rt to select the desired group, then press e E Pause playback F Stop playback 44 EN EDITING (VHS DECK) 46 EN Dubbing (from DVD to VHS) A Load a cassette and place a disc For the VHS deck For the DVD deck 48 EN REMOTE CONTROL Remote A/B/C/D Code Switching 50 EN Control Your JVC TV Using Additional Buttons SYSTEM CONNECTIONS 52 EN SUBSIDIARY SETTINGS 54 EN 8B.E.S.T. — ON / OFF 8PICTURE CONTROL— AUTO (NORM) / EDIT / SOFT NORM) EDIT 8AUTO SP]LP TIMER — ON / OFF 8VIDEO STABILIZER — ON / OFF 8AUTO POWER OFF — 3H / OFF 56 EN LANGUAGE]PICTURE]AUDIO ]OTHERS ](Back to the beginning) 8MONITOR TYPE — 4:3 PS/4:3 MULTI PS 8PICTURE SOURCE — VIDEO (NORMAL) / VIDEO (ACTIVE) / FILM / AUTO VIDEO (NORMAL) 58 EN 8COUNTRY CODE 8SET LEVEL 8RESUME — ON / OFF OFF Country/Area Code List for Parental Lock 60 EN Manual Channel Set A Access the Main Menu screen F Set the station The screen to the right appears when the station is detected B Access the Tuner Set screen 62 EN Fine Tuning Channels Already Stored A Select the channel to fine-tune twice B Perform tuning Press rt until the picture is its clearest. Then press ENTER or e 64 EN Information on Multi-SystemCompatibility Off-AirRecording TV System HR-XV38SAG/HR-XV38SAS 66 EN TROUBLESHOOTING 68 EN TIMER RECORDING (VHS deck) Timer recording won’t work The clock and/or the timer have been set incorrectly ●The timer is not engaged ]Press # and confirm that “#” is displayed on the front display panel 70 EN LIST OF TERMS XV38SAS-XV38SAG/HR-HR