JVC HR-XVC29SU manual 28 EN, Skip Search, Index Search, Instant ReView

28 EN OPERATIONS ON VCR DECK (cont.)

Slide to the right.

3PLAY

INDEX ¢

4INDEX

Skip Search

During playback, press 1 to 6 times to skip over unwanted sections.

Each press initiates a 30-second period of fast-motion playback. Normal playback resumes automatically.

To resume normal playback during a Skip Search, press 4 PLAY.

Index Search

Your unit automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the unit is in the Stop mode.

Activate Index Search.

Press 2 INDEX or INDEX 6. “INDEX –1” or “INDEX 1” is displayed on the TV screen and search begins in the corresponding direction.

●To access index codes 2 through 9, press 2 INDEX or INDEX 6 repeatedly until the correct index number is displayed.

Example:

To locate the beginning of B from the current position, press 2 INDEX twice.

To locate the beginning of D from the current position, press INDEX 6 once.

Current position

Index number

●When the specified index code is located, playback begins automatically.

Instant ReView

Simply by pressing a single button, the unit power comes on, rewinds, and begins playback of the last timer-recorded program. If you have several programs recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the unit is off and that the Timer mode is disengaged.

Activate Instant ReView.

Press . The unit power comes on and the unit searches for the index code indicating the start of the last timer-recorded program. Once it’s found, playback begins automatically.

●To watch the first of the 3 programs, press three times. The unit searches and begins playback automatically. You can access a program as far as 9 index codes away from the current tape position.