Masterpage:Right

EN 55

Filename [XVC2829US_09Editing.fm]
Page 55 8 December 2004 9:56 am

EDITING (DVD DECK)

Digital Audio Dubbing
You can dub selected audio from the DVD or Audio CD disc to a
MD etc.
However, it is not possible to dub the copy-protected disc.
Example: Dubbing to a MD
AMake connections.
Connect the coaxial cable between the unit and the
digital audio device.
BPlace a disc and load a MD.
For the DVD deck
For details, refer to “Placing a Disc” (墌pg. 8).
For the digital audio device
Insert a MD.
CPrepare the DVD deck for dubbing.
APress DVD and select the audio to be dubbed.
BSearch for the point where you want to start dubbing
by pressing 4 PLAY, FF 5 or 3 REW then press
8 STOP.
CPress 3 REW a little, then press 4 PLAY to start
playback.
DPress 9 PAUSE to pause playback a little before the
start point.
DPrepare the audio device for dubbing.
Select the input mode.
EStart dubbing.
APress 4 PLAY to start playback on the DVD deck.
BStart recording on the audio device.
FEnd dubbing.
Stop recording on the audio device. Then press 8 STOP
to stop playback on the DVD deck.
NOTES:
●There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
●You can also dub a Video CD or SVCD. Set “DIGITAL AUDIO
OUTPUT” to “PCM ONLY.” (墌pg.62)
●Turn on the TV and select the VCR channel (or AV
mode).
●Slide the TV/VCR/DVD switch on the Remote to the
right.
Rear of unit
Digital audio device
(MD deck etc.)
Coaxial cable
(not supplied)
DIGITAL AUDIO OUT
Player
Recorder
XVC2829US_01.book Page 55 Wednesday, December 8, 2004 10:48 AM