Tray Lock, VHS indicator disappears from | JVC HR-XVC29SU guide

			EN 69
OTHER PROBLEMS

	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	The image of TV broadcast appears	● The unit leaves turned on and the DVD	Turn off the unit, or press VCR to select
	distorted on the TV screen.	deck is selected.	the VCR deck, then press TV/VCR so that
			the VHS indicator disappears from the
			front display panel.

2.	Whistling or howling is heard from the	● The camcorder’s microphone is too	Position the camcorder so its microphone
	TV during camcorder recording.	close to the TV.	is away from the TV.
		● The TV’s volume is too high.	Turn the TV’s volume down.

3.	When scanning channels, some of	● Those channels have been designated to	If you need the skipped channels, restore
	them are skipped over.	be skipped.	them. ( pg. 25)

4.	The channel cannot be changed.	● Recording is in progress.	Press 9 PAUSE to pause the recording,
			change channels, then press 4 PLAY to
			resume recording.

5.	Channel settings that were made	● After the manual settings were made,	Perform manual setting again.
	manually seem to have changed or	Auto Channel Set was performed.
	disappeared.

6.	Even though Auto or Semiauto Clock	● The clock setting data received from the	Select a different host channel during
	Set has been performed, the clock is	host channel is incorrect.	“Semiauto Clock Set” ( pg. 23), or
	incorrect.		perform “Manual Clock Set” ( pg. 23).

ATTENTION

This unit contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the unit off and unplug the AC power cord. Then plug it in again and turn the unit on. Take out the cassette. After checking the cassette, operate the unit as usual.

Tray Lock

You can lock the disc tray to prohibit the unwanted disc ejection by children.

To lock the disc tray.

While the unit is turned off, press and hold 8 STOP, then press x OPEN/CLOSE on the unit. “LOCK” appears on the front display panel and the disc tray is locked.

To unlock tray

While the unit is turned off, press and hold 8 STOP, then press x OPEN/CLOSE on the unit. “UNLOCK” appears on the display panel.

Image 69

JVC HR-XVC29SU Tray Lock, VHS indicator disappears from, Select a different host channel during, To lock the disc tray

Contents

For Customer Use HR-XVC29SU Declaration of Conformity Dear Customer Power Cord Protection Power SourcesPower Lines Grounding or Polarization Before YOU Install Your NEW Unit Do not block the unit’s ventilation openings or holes Do not place the unitTo mobile phone users On placing the unit Remote Control Functions DVD deck only Scan Mode Set DVD deck onlyMode Set VCR deck Mode Set DVD deck Child Lock About Discs Playable Discs About DiscsUnplayable Discs Region Number File Structure of Discs Placing a DiscCare and Handling of Discs J K L M N O P Front View 10 EN Rear ViewFront Display Panel On-Screen Display VCR deck Shows you where you are BeginningTo recall an indication On the tape 12 EN How To UseRemote One Touch Replay Button pg , 42 m Skip Search Button pg Connect the unit to power source Check the contentsSituate the unit Connect the unit to TV 14 EN 8To connect to a TV with component video input connectorsDVD deck only Set the VCR channel to off Switch the mode Scan Mode SetTurn on the unit Select the DVD deck What to do if Plug & Play setting failed Perform Plug & Play setupPlug & Play Set 16 EN Select the mode setting Select the modeMonitor Set DVD deck 18 EN Language Access the DVD Set Up menu screen Hightlight to on ScreenLANGUAGE, then press Procedure shows how to set Menu Language On the DVD Set Up menu screen as an exampleSee Language Code List pg 20 EN Language Code List Clock Set Access the Clock Set screen22 EN Preparations Manual Clock Set Semiauto Clock Set Tuner Set Access the Tuner Set screen24 EN Auto Channel Set Manual Channel Set Access the Manual Channel Set screenAdd or skip the desired channels To add channels 26 EN Basic Playback Variable Speed Search Slow MotionPause during playback Activate frame-by-frame playback Skip Search 28 ENIndex Search Instant ReView Repeat Playback Next Function MemoryOne Touch Replay Activate Repeat Playback 30 EN Adjust the tracking manuallyManual Tracking Soundtrack Selection Set the tape speed Choose a programStart recording Pause/Resume recording Engage the ITR mode Instant Timer Recording ITR32 EN Record One Program While Watching Another Tape Remaining Time Reset the counterSecond Audio Recording Set the counter display 34 EN Access the Program screenEnter the program start time Enter the program stop time To Timer-Record Weekly Or Daily Serials Engage the unit’s timer modeEnter the channel position Cable Box or DBS Receiver Users 36 EN Disengage the timer modePress PROG. Check Press PROG. Check again Cancel or change a program To cancel or change a programReturn to the timer mode Press Timer 38 EN Cancel or change program settingConfirm the overlapping programs Select the program to modify Satellite Auto Recording You can also connect the cable box if it has a timer Load the disc 40 ENPause playback Press 8 Stop Access the DVD menu Locating a desired scene using the DVD menuAccess the PBC menu Locating the Start Point of the Item or Skip the Item 42 EN ZoomingActivate frame-by-frame playback Select the repeat mode Access the repeat modeAccess the on-screen bar Select menu item 44 EN Time SearchSubtitle Selection Angle Selection Select the audio settingSelect the view angle Svcd VFP function Adjusting the picture quality 46 ENSound Effect Access the status bar How to Access the On-Screen BarAccess the menu bar Select menu item Menu Bar Functions for SVCD/Video CD/Audio CD 48 EN Outline Control display PrecautionsAbout files and folders groups on the disc For making your own disc Basic Playback 50 ENSelect the group Play Zooming a still picture Group/File SelectionTo start playback by specifying the group/file number To return to the control display 52 EN Edit From a Camcorder Engage the Record Pause mode of the recording deck Set the input mode of recording deckAnother Video Recorder Start the source player Dubbing 54 ENFrom DVD to VCR Place a disc and load a MD Digital Audio DubbingPrepare the audio device for dubbing For the digital audio device 56 EN Make connections Access the Function Set screen Mode Set58 EN VCR deck For Example 60 EN When this function is set to on Language Picture Audio Others Back to the beginning For each mode setting, see corresponding pagesPress rt to move the hightlight to RESUME, then press Enter Press rt to select ON, then press Enter Picture Settings Audio Settings62 EN Playback discs Audio is played back with channels other than Dolby DigitalDigital Audio CD/Video CD Child Lock Others Settings64 EN Set the Child Lock On the Remote On the unit Press DVD so that the DVD indicator DVD indicator lights up on the front66 EN Lights up on the front display panel Recording cannot be started There is no cassette loaded, or Jpeg Files Playback DVD deck 68 EN Tray Lock VHS indicator disappears fromSelect a different host channel during To lock the disc tray Playback 70 EN Horizontal resolution Signal-to-noise ratio 45 dBInput/Output RCA connectors X 1, OUT x Signal system 72 EN When programs overlap each other Scan Mode Set DVD deck onlyZooming Still Picture/Frame-By-Frame Playback 74 EN Page HR-XVC29SU