44 EN, Time Search, Subtitle Selection | JVC HR-XVC29SU guide

44 EN

OPERATIONS ON DVD DECK (cont.)

Slide to the right.

A.MONITOR

Number keys

ON SCREEN	SUBTITLE
	ANGLE

ENTER

Time Search

You can play back a disc from the desired point by specifying the elapsed time from the beginning of the current title (for DVD VIDEO) or the disc (for Audio CD/Video CD) using the Time Search.

1Access the on-screen bar.

Press ON SCREEN twice. The on-screen bar appears on the TV screen.

2Select menu item.

Press w e to hightlight , then press ENTER.

●The following pop-up window appears under the selected item.

3Select the time.

Press the number keys (0-9) to enter the time, then press

ENTER.

Example:

To play back from a point 2 (hours): 34 (minutes): 08 (seconds) elapsed

TIME	_ : _ _ : _ _		TIME	2 : _ _ : _ _
	Press 2			Press 3

TIME	2 : 3 _ : _ _		TIME	2 : 3 4 : _ _
	Press 4			Press 0

TIME	2 : 3 4 : 0 _		TIME	2 : 3 4 : 0 8
	Press 8

If you have specified a wrong selection,

Press w repeatedly until the wrong number is erased, then press number keys to enter the correct numbers.

●The unit starts playback from the specified time.

To clear the on-screen bar

Press ON SCREEN.

NOTE:

Some DVD VIDEO discs do not contain time information, and it is no possible to use the Time Search function.

Subtitle Selection

You can select subtitle language.

●During playback

1Access the menu.

Press SUBTITLE.

●The following pop-up window appears on the TV screen.

Example (DVD): “ENGLISH” is selected out of 3 subtitle languages recorded.

2Select the subtitle language.

Press rt repeatedly to select the desired subtitle language. To turn off the subtitle, press SUBTITLE repeatedly until “OFF” is selected.

●Each time you press the button, the subtitle language changes.

●The pop-up window disappears if no operation is done for about 5 seconds.

NOTES:

●For DVD VIDEO

Some subtitle languages are abbreviated in the pop-up window. See “Language Code List” ( pg. 21).

●For SVCD

An SVCD can contain up to four subtitles. Pressing SUBTITLE changes the subtitles regardless of whether the subtitles are recorded or not.

Image 44

JVC HR-XVC29SU manual 44 EN, Time Search, Subtitle Selection

Contents

HR-XVC29SU For Customer Use Dear Customer Declaration of Conformity Power Sources Power Cord ProtectionPower Lines Grounding or Polarization Before YOU Install Your NEW Unit Do not place the unit Do not block the unit’s ventilation openings or holesTo mobile phone users On placing the unit DVD deck only Scan Mode Set DVD deck only Remote Control FunctionsMode Set VCR deck Mode Set DVD deck Child Lock About Discs About Discs Playable DiscsUnplayable Discs Region Number Care and Handling of Discs File Structure of DiscsPlacing a Disc Front View J K L M N O P Front Display Panel 10 ENRear View Shows you where you are Beginning On-Screen Display VCR deckTo recall an indication On the tape How To Use 12 ENRemote One Touch Replay Button pg , 42 m Skip Search Button pg Check the contents Connect the unit to power sourceSituate the unit Connect the unit to TV 8To connect to a TV with component video input connectors 14 ENDVD deck only Set the VCR channel to off Scan Mode Set Switch the modeTurn on the unit Select the DVD deck Perform Plug & Play setup What to do if Plug & Play setting failedPlug & Play Set 16 EN Select the mode Select the mode settingMonitor Set DVD deck Language 18 EN LANGUAGE, then press Access the DVD Set Up menu screenHightlight to on Screen On the DVD Set Up menu screen as an example Procedure shows how to set Menu LanguageSee Language Code List pg 20 EN Language Code List Access the Clock Set screen Clock Set22 EN Preparations Semiauto Clock Set Manual Clock Set Access the Tuner Set screen Tuner Set24 EN Auto Channel Set Access the Manual Channel Set screen Manual Channel SetAdd or skip the desired channels To add channels Basic Playback 26 EN Slow Motion Variable Speed SearchPause during playback Activate frame-by-frame playback 28 EN Skip SearchIndex Search Instant ReView Next Function Memory Repeat PlaybackOne Touch Replay Activate Repeat Playback Adjust the tracking manually 30 ENManual Tracking Soundtrack Selection Choose a program Set the tape speedStart recording Pause/Resume recording Instant Timer Recording ITR Engage the ITR mode32 EN Record One Program While Watching Another Reset the counter Tape Remaining TimeSecond Audio Recording Set the counter display Access the Program screen 34 ENEnter the program start time Enter the program stop time Engage the unit’s timer mode To Timer-Record Weekly Or Daily SerialsEnter the channel position Cable Box or DBS Receiver Users Disengage the timer mode 36 ENPress PROG. Check Press PROG. Check again To cancel or change a program Cancel or change a programReturn to the timer mode Press Timer Cancel or change program setting 38 ENConfirm the overlapping programs Select the program to modify You can also connect the cable box if it has a timer Satellite Auto Recording 40 EN Load the discPause playback Press 8 Stop Locating a desired scene using the DVD menu Access the DVD menuAccess the PBC menu Locating the Start Point of the Item or Skip the Item Activate frame-by-frame playback 42 ENZooming Access the repeat mode Select the repeat modeAccess the on-screen bar Select menu item Subtitle Selection 44 ENTime Search Select the audio setting Angle SelectionSelect the view angle Svcd Sound Effect VFP function Adjusting the picture quality46 EN How to Access the On-Screen Bar Access the status barAccess the menu bar Select menu item 48 EN Menu Bar Functions for SVCD/Video CD/Audio CD Precautions Outline Control displayAbout files and folders groups on the disc For making your own disc 50 EN Basic PlaybackSelect the group Play Group/File Selection Zooming a still pictureTo start playback by specifying the group/file number To return to the control display Edit From a Camcorder 52 EN Set the input mode of recording deck Engage the Record Pause mode of the recording deckAnother Video Recorder Start the source player From DVD to VCR Dubbing54 EN Digital Audio Dubbing Place a disc and load a MDPrepare the audio device for dubbing For the digital audio device 56 EN Make connections Mode Set Access the Function Set screen58 EN VCR deck For Example When this function is set to on 60 EN For each mode setting, see corresponding pages Language Picture Audio Others Back to the beginningPress rt to move the hightlight to RESUME, then press Enter Press rt to select ON, then press Enter 62 EN Picture SettingsAudio Settings Audio is played back with channels other than Dolby Digital Playback discsDigital Audio CD/Video CD Others Settings Child Lock64 EN Set the Child Lock On the unit On the Remote DVD indicator lights up on the front Press DVD so that the DVD indicator66 EN Lights up on the front display panel Jpeg Files Playback DVD deck Recording cannot be started There is no cassette loaded, or 68 EN VHS indicator disappears from Tray LockSelect a different host channel during To lock the disc tray 70 EN Playback Signal-to-noise ratio 45 dB Horizontal resolutionInput/Output RCA connectors X 1, OUT x Signal system 72 EN Scan Mode Set DVD deck only When programs overlap each otherZooming Still Picture/Frame-By-Frame Playback 74 EN Page HR-XVC29SU