Filename [XVC2829UC_09Editing.fm]
Masterpage:Left+
54 EN
Page 54 11 January 2005 2:22 pm
EDITING (VCR DECK) (cont.)
Dubbing

(from DVD to VCR)

You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
In such case, “Err” appears on the front display panel.
ALoad a cassette and place a disc.
For the VCR deck
Insert a cassette with the record safety tab intact.
For the DVD deck
For details, refer to “Placing a Disc” (pg.8).
BPrepare the VCR deck for dubbing.
APress VCR.
BPress SP/EP to select recording speed.
CSearch for the point where you want to start dubbing
by pressing 4 PLAY, FF 5 or 3 REW then press
8 STOP.
CPrepare the DVD deck for dubbing.
APress DVD.
BSearch for the point where you want to start dubbing
by pressing 4 PLAY, FF 5, 3 REW, SKIP 6 or
2 SKIP.
CPress 9 PAUSE to pause playback a little before the
start point.
Turn off the on-screen bar if it appears on the TV screen.
DStart dubbing.
Press and hold 7 REC, then press 4 PLAY on the Remote
(on DVD deck mode).
“dub” lights on the front display panel.
EEnd dubbing.
Press 8 STOP.
Be sure to press 8 STOP while the VCR indicator lights up on
the unit.
NOTES:
You can dub from DVD to VCR regardless of the scan mode
setting. (pg. 15) However, the progressive signals will be
converted to the interlace signals when dubbing.
Set “ON SCREEN GUIDE” to “OFF” (pg.64) if you do not
want to record the on-screen display for DVD discs during
dubbing.
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
Set “PICTURE CONTROL” to “EDIT.” (pg.59)
Turn on the TV and select the VCR channel (or AV
mode).
Slide the TV/VCR/DVD switch on the Remote to the
right.
REC
3 PLAY
DVD
8 PAUSE
FF ¡
1 REW
SP/EP
SKIP ¢
4 SKIP 7 STOP
VCR
Slide to the
right.
XVC2829UC_09Editing.fm Page 54 Tuesday, January 11, 2005 2:22 PM