Masterpage:Right-No-Heading
EN 33
Filename [XVC2829US_07S-VHS.fm]
Page 33 8 December 2004 9:56 am
Elapsed Recording Time Indication1Set the counter display.
Press DISPLAY until a counter reading appears on the
front display panel.
2Reset the counter.
Press C.RESET before starting recording or playback.
●The counter is reset to “0:00:00” and shows the exact elapsed
time as the tape runs. You can check the exact time of a
recording or playback.
Tape Remaining TimePress DISPLAY until the time remaining on the tape
appears.
●The front display panel shows the tape remaining time with “:”
blinking.
●By pressing the DISPLAY button, you can change display to
show the channel position*, clock time, counter reading or
tape remaining time.
* C hannel position is not displayed during playback.
NOTES:
●When you press ON SCREEN, the on-screen display appears
on the TV screen for 5 seconds, then the displays other than
the counter disappears. To clear the counter display, press ON
SCREEN.
●Depending on the type of tape being used, the tape remaining
time reading may not appear right away, or is not correct.
“– –:––” may sometimes appear with “:” blinking, or the
display may blink on occasion.
Second Audio RecordingThis unit’s built-in MTS decoder enables reception of
Multichannel TV Sound broadcast. To record a SAP program
received, set “2ND AUDIO RECORD” to “ON.” (墌pg.60)
NOTE:
When the channel is changed on the unit;
●The “STEREO” indicator appears on the screen for about
5 seconds if the program is a stereo broadcast.
●The “SAP” indicator appears on the screen for about 5 seconds
if the program is a SAP broadcast.
●Both indicators appear when a stereo program is accompanied
by SAP sound.
DISPLAY
C.RESET
ON SCREEN
Slide to the
right.
XVC2829US_01.book Page 33 Wednesday, December 8, 2004 10:48 AM