JVC KD-LH810 Sirius ID*2, Beep, Ext Input*3, Telephone*4, Amp Gain, Low PWR, Off*4, Color Sel

Indications		Selectable settings, [reference page]
Sirius ID*2		The 12-digits SIRIUS identification number is shown on the display,
	SIRIUS® ID	[38].
Beep		On: [Initial]; Activates the key-touch tone.
	Key-touch tone	Off: Deactivates the key-touch tone.
Ext Input*3		Changer: [Initial]; To use a JVC CD changer, [14].
	External input	Ext In:	To use any external component (other than SIRIUS DLP),
			[37].
Telephone*4		Muting1/Muting2: Select either one which mutes the sounds while
	Telephone muting		using the cellular phone.
		Off: [Initial]; Cancels.
		• If CD or CD changer has been selected as the source, playback pauses
		during telephone muting.
Amp Gain		You can change the maximum volume level of this receiver.
	Amplifier gain control	High PWR: [Initial]; Volume 00 – Volume 50
		Low PWR:	Volume 00 – Volume 30 (Select this if the maximum
			power of the speaker is less than 50 W to prevent them
			from damaging the speaker.)
		Off*4:	Deactivates the built-in amplifier.
Color Sel		[Initial: AllSource]; You can select your favorite display color for each
	Color selection	source (or for all sources), [33].
Color Set		You can create your own colors, and select them for the display color,
		[34].
		Day Color: User color during the day time*1.
		NightColor: User color during the night time*1.
	Red	00 – 11 [Initial: Day Color: 07, NightColor: 05]
	Green	00 – 11 [Initial: Day Color: 07, NightColor: 05]
	Blue	00 – 11 [Initial: Day Color: 07, NightColor: 05]
*2	Displayed only when SIRIUS radio is connected.
*3	Cannot be selected if the source is “CD-CH” or “EXT-IN.”
*4	Only for KD-AR860.

ENGLISH

31