ENGLISH
Image Link
•Image Link will not work in the following cases:
–If no <jll> file is included in an MP3/WMA folder.
–If Intro play is activated.
–If the source is changed to another from “CD.”
–If more than one <jll> file are included in a folder, a file with the youngest file number is used for the graphic screen.
Ejecting a disc
•If the ejected disc is not removed within
15 seconds, the disc is automatically inserted again into the loading slot to prevent it from dust. (Disc will not play this time.)
Sound adjustment 
General
•If you are using a
•Subwoofer out setting takes effect only when a subwoofer is connected.
•You cannot change the input level— VolAdjust of the FM stations. If the source is FM, “Fix” will appear when you try to adjust it.
Graphic display 
Downloading (or deleting) files
•You can download a file only while selecting “CD” as the playback source; you can delete a file while selecting any source.
•If you have already downloaded an animation for “Opening,” “Ending,” or “Movie,” downloading a new animation deletes the previously stored animation.
•It takes a long time to download an animation.
–About 3 to 4 seconds for a still image (one frame).
–About 1 to 2 minutes for an animation of 30 frames.
–About 4 minutes for an animation of 90 frames.
•If a disc inserted does not include any <jll> and <jla> files, beeps sound when you try to operate the downloading procedure.
•If you try to store a 31st image for picture screen, “Picture Full” appears and you cannot start downloading. Delete unwanted files before downloading.
•If the total frame number of an animation downloaded exceeds the following number, the frames exceeding that numbers are ignored.
–For “Opening” and “Ending”: 30
–For “Movie”: 90
General settings—PSM 
•“Auto Dimmer” may not work correctly on some vehicles, particularly on those having a control dial for dimming. In this case, change the “Dimmer” setting to any one other than “Auto.”
•If “LCD Type” is set to “Auto,” the display pattern will change to the “Positive” or “Negative” pattern depending on the “Dimmer” setting.
•If you change the “Amp Gain” setting from “High PWR” to “Low PWR” while the volume level is set higher than “Volume 30,” the receiver automatically changes the volume level to “Volume 30.”
Other main functions 
Assigning titles to the sources
•If you try to assign a title to a 31st disc or a 31st station frequency, “Name Full” appears and you cannot enter the text entry mode.
Delete unwanted titles before assignment.
•Titles assigned to discs in the CD changer can also be shown if you playback the disc from the receiver.
46
