JVC KD-AVX2 Manual presetting, Storing stations in memory, How to exit from menus or lists, 2Select “Mode”, then “SSM”

3Finish the procedure.

ENT

Lights up when “Local” mode is activated.

Only stations with sufficient signal strength will be detected.

To tune in to all receivable stations, repeat the same procedure to set “DX / Local” to “DX”. The LO indicator goes off and the DX indicator lights up.

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting— SSM (Strong-station Sequential Memory)

After selecting the FM band (FM1 – FM3) you

want...

1MENU

2Select “Mode”, then “SSM”.

3

ENT

“SSM” is shown until automatic presetting is over.

Local FM stations with the strongest signals are searched and stored automatically in the FM band.

Manual presetting

After tuning in the station you want to preset...

1 MENU ENGLISH

2Select “List”, then a preset number (1–6) you want to store the station into.

EX.: Storing 92.5 MHz into preset number 4 of FM1

•You can also display the list by pressing and holding 5/∞ buttons.

3ENT

Stored preset number flashes for a while.

How to exit from menus or lists

SRC D DISP

Menu or list operations are canceled and the screen returns to the source screen.

13