JVC KD-AVX2 On:, Level, Normal, • Phase, Reverse, Through:, Subwoofer, Crossover, Fader/Balance, Volume Adjust, High Pass Filter, 80Hz, 120Hz [Initial], 150Hz, (00)

Indications	Selectable settings, [reference page]
Fader/Balance	Adjust fader—speaker output balance between the front and
	rear speakers.
	•Upmost—front only
	•Downmost—rear only
	When using a two-speaker system, set the fader to the center
	(00).
	Adjust balance—speaker output balance between the left and
	right speakers.
	• Leftmost—left only
	• Rightmost—right only
	Press ENT to finish the procedure.
		Adjusts fader
		Adjust balance

Sound		Adjust balance
	Volume Adjust	Adjust and store the volume level of each source except FM.
		Once you have made an adjustment, it is memorized, and
		the volume level will automatically increase or decrease by
		adjusted level when you change the source.
		Adjust to match the input level to the FM sound level.
		• –12 (min.) to +12 (max.) [Initial: 00]
	Subwoofer	Adjust the settings below in the submenu:
		• Phase: Subwoofer phase. Select either “Normal” or
		“Reverse”, which reproduces a better sound.
		• Level*1: Subwoofer output level. Level: –06 (dB) to +08
		(dB) [Initial: 00 (dB)].
	High Pass Filter	Through: [Initial]; Select when the subwoofer is not
		connected.
		On: Select when the subwoofer is connected.
	Crossover	Adjust the crossover frequency between the front/rear
		speakers and the subwoofer.
		80Hz, 120Hz [Initial], 150Hz

*1 The setting is ineffective when a multi-channel source is played back and Disc Surround is on, or when Dolby PLII Movie/Music is in effect. Adjust the level on “Speaker Level” [36] for the cases.

ENGLISH

39