JVC KD-AVX2 Setup, /Rear Lch, Speaker Level*1, Speaker Distance*4, • Front Lch/Center ch/Front Rch/Rear Rch/Rear Lch:, 5 / ∞, speakers), the test tone

ENGLISH

Indications	Selectable settings, [reference page]
Speaker Level*1	You can adjust the output level of each speaker monitoring
	the test tone.
	Press and hold ENT to activate (or cancel) the test tone.
	• Front Lch/Center ch/Front Rch/Rear Rch/Subwoofer*2
	/Rear Lch: adjust the output level of each speaker in the
	range of –10dB –+10dB. [Initial]; 00dB
		Adjusts the speaker level
		Selects the speaker to adjust

		Selects the speaker to adjust
2*3
	Speaker Distance*4	You can adjust the speaker output timing separately for each
Setup
		speaker according to the distance from the speakers to the
		listening position.
Disc		• Front Lch/Center ch/Front Rch/Rear Rch/Rear Lch:
		adjust the speaker distance in the range of 15 cm (6 inch) to
		600 cm (240 inch) in 15-cm (6-inch) step.
		* Pressing and holding DISP (D) changes the measuring
		unit between “cm” and “inch” alternately.
		[Initial]; 120 cm (for center speaker), 150 cm (for the other
		speakers)
			Adjusts the speaker distance
			Selects the speaker to adjust

Selects the speaker to adjust

*1 When activating the test tone, white noise comes out and cycles between the speakers activated on “Speaker Size” [35] for about 2 seconds each. Press 5 / ∞ repeatedly while the test tone comes out from the target speaker to adjust the settings (the test tone continues to come out from the target speaker during the adjustment).

*2 The setting is effective only when a multi-channel source is played back and Disc Surround is on, or when Dolby PLII Movie/Music is in effect. Adjust the level on “Subwoofer” [39] for other cases.

*3 Selectable only when DISC is the source.

*4 Unselectable when all the speakers other than front ones are deactivated on “Speaker Size” [35].

36