JVC KD-AVX2 Maintenance, To play new discs, To keep discs clean, How to handle discs, Moisture condensation, How to clean the connectors, its case

	Maintenance
ENGLISH
		connectors.
		How to clean the connectors
	Frequent detachment will deteriorate the
	To minimize this possibility, periodically wipe
	the connectors with a cotton swab or cloth
	moistened with alcohol, being careful not to
	damage the connectors.

Connectors

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.

•Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this receiver may reject the disc.

To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

Moisture condensation

Moisture may condense on the lens inside the DVD/CD player in the following cases:

•After starting the heater in the car.

•If it becomes very humid inside the car. Should this occur, the DVD/CD player may malfunction. In this case, eject the disc and leave the receiver turned on for a few hours until the moisture evaporates.

How to handle discs

When removing a disc from	Center holder
its case, press down the center
holder of the case and lift the
disc out, holding it by the edges.
• Always hold the disc by the

edges. Do not touch its recording surface. When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up).

•Make sure to store discs into the cases after use.

Do not use the following discs:

Warped disc

StickerSticker residue

Stick-on label

52