Dual Zone operations

ENGLISH

 

 

 

 

at a time

 

 

Playing back two sources

 

 

 

You can connect external audio equipment

to the 2nd AUDIO OUT plug on the rear, and play back a disc separately from the source selected on the unit.

You can activate Dual Zone while listening to any source.

•When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller.

•When Dual Zone is in use, the surround settings (page 23) become ineffective and unadjustable. No sound comes from the center speaker.

1MENU

2Select “Dual Zone”, then “On” or “On-Surround”.

ENT

Off: Deactivate Dual Zone.On: Activate Dual Zone. On-Surround*1*2:

Activate Dual Zone and add the headphone Surround*3 effect to the disc playback sound. Select this when listening the disc playback sound with headphones.

*1 Not effective when playing back an MPEG disc.

*2 The surround effect is also added to the sound from the speakers when you select “DISC” as the source.

*3 JVC original headphone virtual surround system.
The source automatically changes to “DISC”and appears on the monitor.

To select a different source to listen through the speakers, press SRC on the control panel.

•By using the buttons on the control panel, you can operate the newly selected source without affecting Dual Zone operations.

3Adjust the volume through the 2nd AUDIO OUT plug using the remote controller.

4Operate the DVD/CD player using the remote controller by referring to the monitor screen.

To cancel Dual Zone operations, select“Off” on step 2 on the left column. ( / disappears.)

On the remote controller:

You can also activate and deactivate Dual Zone.

To change the Dual Zone mode between “On” and “On-Surround”, select the Dual Zone

mode you want on step 2 on the left column.About sounds reproduced through the rear terminals

Through the 2nd AUDIO OUT, 2 channel signal is emitted. When playing a multi- channel encoded disc, multi-channel signals are downmixed.

30