JVC KD-SH77R manual For KD-SH55R, When connecting a DVD player, When connecting a VCR

When connecting a DVD player:		1 Select the external component (AUX
3:	: Turns on and off the power.		INPUT or LINE INPUT).
	Starts playback.		When you select a
Á:	• Fast-forward the track when pressed and		source, the power
	held.		automatically comes on.
	• Skip to the beginning of the next tracks		Each time you press the
			button, the source
	when pressed briefly.
			changes as described on
1:	• Reverses the track when pressed and
			page 7.
	held.
	• Go back to the beginning of the current
	track when pressed briefly.
	Go back to the beginning of the previous
			AUX INPUT: To select the component
	tracks when pressed consecutively.
			connected to the auxiliary
7:	Stops operations.
			input jack on the control
Note:
			panel
When you press the above buttons, the display shows
“DVD” and its operation mode (such as 3, 7 ).

ENGLISH

When connecting a VCR:

: Turns on and off the power.

3: Starts playback.

Á: Fast-winds a tape when pressed and held.

1: Rewinds a tape when pressed and held.

7: Stops operations.

Note:

When you press the above buttons, the display shows “VCR” and its operation mode (such as 3, 7).

For KD-SH55R:

You can connect two external components to this unit.

Connect one to the auxiliary input jack on the control panel, and the other to the CD changer jack on the rear.

Before operating the external component connected to the CD changer jack, select the external input correctly. (See “To select the external component to use – EXT INPUT” on page 26.)

If the input level of the external component connected to the auxiliary input jack is not high enough, increase the input level properly.

Without adjusting the input level, you may be surprised at a loud sound when you change the source from the external component to another. (See “To adjust the auxiliary input level – AUX ADJ” on page 26.)

LINE INPUT: To select the component connected to the CD changer jack

•If “LINE INPUT” cannot be selected, see page 26 and select the external input (“LINE INPUT”). This cannot be used together with the CD changer.

2 Turn on the connected component and start playing the source.

31