ENGLISH
EXTERNAL COMPONENT OPERATIONS
MD player, etc.
auxiliary input |
Playing external components
For KD-SH77R:
You can connect two external components to this unit.
Connect one to the auxiliary input jack on the control panel, and the other to the LINE IN plugs on the rear.
If you connect a JVC’s VCR or DVD player to the LINE IN plugs
You can operate it through this receiver using the number buttons on the control panel. When you operate the VCR, you have to change the operation mode of the number buttons from the DVD operation mode to the VCR operation mode. (See “To select the target component to operate through this receiver – KEY SELECT” on page 26.)
If the input level of the external
components is not high enough, increase the input level properly.
Without adjusting the input level, you may be surprised at a loud sound when you change the source from the external components to another. (See “To adjust the line input level – LINE ADJ” and “To adjust the auxiliary input level – AUX ADJ” on page 26.)
1 Select the external component (AUX INPUT or LINE INPUT).
When you select a source, the power automatically comes on.
Each time you press the button, the source changes as described on page 7.
AUX INPUT: To select the component connected to the auxiliary input jack on the control panel
LINE INPUT: To select the component connected to the LINE IN plug
2 Turn on the connected component and start playing the source.
•If connecting a JVC’s DVD player or VCR, you can perform the following operations.
30
