3. Settings and adjustments for shooting (cont’d)
Focus adjustment
Back focus adjustment can be performed on the
4. Shooting a computer monitor screen Shooting a PC monitor
Horizontal line noise will appear on the screen when attempting to record images on a PC monitor or display. To clear this noise,
* When using a lens that is pro- |
vided with function for adjust- |
ment of back focus, make the |
Male
In the digital output mode, the settings should be performed using the special application software
adjustment on the lens side. |
Focus ring
Female
[FOCUS] [LOCK]
1.
2.
Open the side switch panel, and press the [MENU] button. The [MENU (QUICK)] screen appears on the monitor screen.
Press the [UP] or [DOWN] button to select [SHUTTER], then press [SET] (The set value of [SHUTTER] item will be displayed in purple).
1. | Using a screwdriver, loosen the [LOCK] backfocus lock- |
Set the | ing screw by turning it counterclockwise. |
EEI | |
mode |
|
2. | Open the lens’ iris. |
Inside window
|
| [UP] | 3. | Use the [UP] or [DOWN] button to change the set value |
|
|
|
| |
[MENU] | UP/AW |
|
| to “V. SCAN”, then press the [SET] button (The set value |
| [SET] |
| ||
MENU | SET | [DOWN] |
|
|
| DOWN |
| of [SHUTTER] item will return to white). | |
1 2 3 4 |
|
|
| 3. | If the image is blurred with white, make the setting in |
1. |
| the EEI mode. |
| [MENU (QUICK)] screen ( page E41) | |
|
| |
| 4. | Zoom lens to maximum telephoto position. |
| 5. | Adjust the focus of the lens. |
| 6. | Zoom lens to maximum |
7. | 7. | Turn the [FOCUS] backfocus adjustment screw to ob- |
| tain optimal focus. | |
|
| |
| 8. | Repeat steps 4 through 7 two or three times. |
PC monitor Select V.SCAN
4. | Next, press the [UP] or [DOWN] button to select [SHUT- |
| TER SPEED], then press the [SET] button. |
5. | Press either [UP] or [DOWN] to change the shutter |
| speed. |
Bar | When a black bar can be seen on the screen: |
| |
| decrease the shutter speed by pressing the [DOWN] |
| button. |
| When a white bar can be seen on the screen: |
| increase the shutter speed by pressing the [UP] but- |
| ton. |
6. | Press the [SET] button when the bar is at its minimum. |
| Data is registered to |
Pressing the [MENU] button without pressing the [SET] button | |
will return the unit to its previous settings without confirming | |
the changes. |
9. | Turn the [LOCK] backfocus locking screw clockwise to |
| lock. |
MENU (QUICK) screen | 7. | Press the [MENU] button to return to the normal screen. |
| ||
MEMO |
|
|
•The vertical scan frequency differs depending on the PC type and the horizontal bar may not be
completely cleared away. The frequency may also change depending on the software used.
E24 | E25 |
|