1. Introduction (continued)

Part names and their functions (continued)

[Rear]

￿

￿

 

ANALOG OUT

IEEE1394

 

 

 

LENS

 

 

￿

MD

￿

CONTROL

DC IN

REMOTE

 

POWER

 

 

￿

 

 

SEE INSTRUCTION MANUAL

 

￿

￿

 

￿[ANALOG OUTPUT] connector

Analog output connector for video signal. Used when connecting the camera to an SXGA-compliant capture board or the des- ignated scan rate converter integrated with the computer. Pin configurations of connectors (  page E13)

MEMO Only output when the AC adapter (AA- P700) is used as the power supply.

￿ [IEEE1394] digital output con- nector Digital output connector for video signal. Used when connecting to the PC’s IEEE 1394 host adapter. Pin configurations of connectors (  page E13) ￿ [LENS] connector 1 To connect the lens’ camera cable (for iris control, power supply). Pin configurations of connectors (  page E12) Mounting the lens (  page E17)

￿ [POWER] indicator Lights when power is supplied to the cam- era.

￿ [DC IN] connector (Mini DIN 8-pin, female) Power (DC 12V) for the camera is supplied through this inlet. For the power supply, use the AA-P700 AC adapter. Pin configurations of connectors (  page E12) Connecting power (  page E18)

￿[REMOTE] terminal (Metal 10-pin, female)

Used to connect external devices such as a trigger switch or flash unit. Pin configurations of connectors (  page E12) Connecting through digital output connec- tor (  page E14) Synchronizing flash and trigger (  page E26)

￿[MD CONTROL] lens connector

2 To connect the lens control cable (for zoom, focusing control). Pin configurations of connectors (  page E12) Mounting the lens (  page E17)

MEMO The motorized lens can only be controlled (zoom, IRIS, focus) from the KY-F1030 when the AC adapter (AA-P700) is used as the power supply.

[Side switch panel section (inside)] ￿ ￿ ￿

 

UP/AW

MENU

SET

 

￿

 

DOWN

1 2

3 4

 

￿

￿ [MENU] button Press this button to output the menu screen through the [ANALOG OUT] connector ￿. Press again to stop display of the menu. Setting procedure (  page E32)

￿ [UP/AW] auto white balance, UP button

[AW (auto white)]

Press this button to adjust the white bal-

ance when the light source illuminating the subject changes. White balance adjustment (  page E22)

[UP]

While the menu screen is displayed, press this button to move up to a select- able item on the menu. While an item is selected, use this button to change the set value.

Setting procedure (  page E32)

￿ [SET] button

 

 

While the menu screen is displayed, press

this button to select a submenu or confirm

a selected item or set value.

Setting procedure(  page E32)

￿ [DOWN] button

While the menu screen is displayed, press

this button to move down to a selectable

item on the menu. While an item is selected,

use this button to change the set value.

Setting procedure(  page E32)

￿ Function setting switch

Used for setting the functions of the KY-

F1030.

 

 

 

ON

 

 

 

OFF

2

3

4

1

Switch 1 <TEST PATTERN> ON: Test signal is output.

OFF: The image being shot by the cam- era is output. Monitor adjustment (  page E21) SYSTEM SETTING screen (  page E40)

Switch 2 <MENU LOCK>

ON: Disables the [MENU] button ￿.

OFF: Enables the [MENU] button ￿.

Switch 3 <SYNC ON GREEN>

ON: Applies the sync signal to the green

(G)channel of the video signal that is output through the ANALOG OUT connector ￿.

OFF: The sync signal is not applied.

Switch 4 <RESERVED>

This switch is not used. Leave it at OFF.

E10

E11

Page 8
Image 8
JVC KY-F1030 manual Rear, Side switch panel section inside