JVC KY-F550 instruction manual Preparation Before Shooting, Connecting Through Digital Output

2. Preparation Before Shooting

Connecting Through Digital Output

Computer can be used to control this unit remotely, record captured images on digital device or display them on the computer or monitor. (Please pre-install the exclusive software for this unit.)

				‘Connecting the			AA-P700
				Power Supply’
								AC ADAPTER AA-P700
				(Page 18)				POWER
								ON	AC IN
	BNC CABLE							OFF
BR-DV3000	Monitor	[VIDEO OUT]					AC Adapter
BR-DV6000	Clamp filter		[DV]			[DC IN]
	(accessories)
					POWER DC IN
			DV
	‘Connecting the			VIDEO OUT		REMORT INSTRUCTION MANUAL
DV VTR	IEEE 1394 Cable’		OUT
	(Page 48)		SYNC			SEE
			RGB, Y/C,	LENS	TRGGER
Exclusive Software								Notes
						[LENS]
					2 3 4			● 2 or more of this unit cannot be con-
					1				nected to 1 computer.
				/ BARS	SET	/ AW
				5		5
					MENU			● Ensure to attach the supplied clamp
	IEEE 1394
									filter to the cable connected to the Digi-
	Terminal
									tal Output [DV] terminal in order to re-
Computer	‘Mounting		the						duce unwanted electromagnetic emis-
									sions.
	Lens’ (Page 17)

1.	Connect the [DV] terminal of this unit to the computer’s DV [IEEE1394] terminal.		1	2 3 4
2.	Set the Switch 1 and Switch 4 located at the side of this unit to [ON] (upper side).	ON
3.
	Switch on the power of this unit.	OFF
4.	Set the “DV SYSTEM” under “SYSTEM” screen to “JVC”.
		Switch 1			Switch 4
5.	Power on the computer and launch the software.
	With the exclusive software provided, it is possible to select the various camera settings and operate the
	camera for shooting. For details, please consult your JVC-authorized dealer.
	Please refer to the software’s HELP menu for details on how it could be used.

Caution

●Perform this when the devices are off.

●When the software has been launched, do not switch on/off the power of the AC adapter or insert and remove the IEEE 1394 cable.

●Disable the automatic standby or hibernation function of your computer before using it.

●This unit’s power can be supplied from the IEEE 1394 cable. However, use the power supply voltage between 10.5 V - 15 V if power lens is to be used. Ensure that the supply capacity of the supply source is adequate in meeting the total power consumptions of both this unit and the power lens used.

E-14