JVC KY-F550 instruction manual White Balance Screen, Auto

5. Setting Via the Menu Screen (continued)

“WHITE BALANCE” Screen

Settings in bold are factory settings

	Item		Function/Variable Values
“WHITE		For setting the white balance mode.
BALANCE”		“AUTO 1”	: Set to this to enable automatic adjustment of white balance.
		“AUTO 2”	: Equipped with 2 modes (“AUTO 1” and “AUTO 2”).
			☞ Page 22 ‘White Balance Adjustment’
			“LEVEL (R)” and “LEVEL (B)” items allow fine-tuning of white
			colour upon achieving white balance.
		“FAW”	: Automatic adjustment of white balance according to different
			illumination conditions.
		“MANUAL”	: Manual adjustment of white balance.
			Can be altered using the “LEVEL (R)” and “LEVEL (B)” items.
		“PRESET”	: Fixes white balance at 3200 K.
	“LEVEL (R)”	For adjusting the reddishness of white balance when “WHITE BALANCE” is set to
		“AUTO” or “MANUAL”.
		Increase value	: Increases reddishness on screen.
		Decrease value	: Decreases reddishness on screen.
		{Variable Values During “AUTO”: –32 - 0 - +31}
		{Variable Values During “MANUAL”: 0 - 128 - 255}
	“LEVEL (B)”	For adjusting the bluishness of white balance when “WHITE BALANCE” is set to
		“AUTO” or “MANUAL”.
		Increase value	: Increases bluishness on screen.
		Decrease value	: Decreases bluishness on screen.
		{Variable Values During “AUTO”: –32 - 0 - +31}
		{Variable Values During “MANUAL”: 0 - 128 - 255}

Notes

●Selection of “LEVEL (R)” and “LEVEL (B)” items is disabled when the “WHITE BALANCE” item is set to “PRESET” or “FAW”. (Displayed as “- - - - - -”)

●When the “MODE” item under “CAPTURE” screen is set to “RANDOM TRG”, the “WHITE BALANCE” item under “FAW” cannot be selected. In addition, although “AUTO1” and “AUTO2” can be selected, auto white cannot be activated even if the [AW] button is pressed.

E-36