JVC KY-F550 Setting and Adjustment During Shooting, External Monitor Adjustment, Adjustment Bars

3. Setting and Adjustment During Shooting

External Monitor Adjustment

Display the built-in colour bars signal at the camera on the monitor to perform colour/contrast/brightness

English

adjustment.

2. [BARS]

5/ BARS

		1 2 3 4
MENU	SET
	∞/ AW
		Switch 4: [OFF]
RGB, Y/C, SYNC OUT		DV

LENS	VIDEO OUT	1.
		POWER
TRGGER		DC IN
	REMORT
	SEE INSTRUCTION MANUAL

1. Connect the colour video monitor to the [VIDEO OUT] of this unit.

Make sure that the Switch 4 located at the side of this unit is set to [OFF] (lower side).

2. Press the [BARS] button to output the colour bars signal (EBU- compliant colour bars).

3. With the colour bars displayed, turn [BLUE CHECK] at the monitor to ON. Screen turns into a monochrome of blue and colour bars appear as blue stripes.

4. Turn the [CHROMA] adjustment knob on the monitor and adjust colour bars 1 and 7 to the same brightness level.

5. With [BLUE CHECK] in the ON mode, turn the [PHASE] ad- justment knob on the monitor to adjust colour bars 3 and 5 to the same brightness level.

6. If brightness of colour bars 1 and 7 vary upon [PHASE] ad- justment, repeat chroma adjustment as in step 4..

7. Turn [BLUE CHECK] at the monitor to OFF and return to the normal screen (R. G. B are all displayed).

3.~7.

White	Yellow	Cyan	Green	Magenta	Red	Blue	Black
1	2	3	4	5	6	7	8

E-21