JVC KY-F550 Setting and Adjustment During Shooting, White Balance Adjustment, AUTO2

3. Setting and Adjustment During Shooting (continued)

White Balance Adjustment

Colour of light (colour temperature) may vary with light sources. When light source for illumination of object is changed, adjust white balance (AUTO WHITE) again. Do not place strong reflectors such as metals near the object. This may cause error in achieving white balance.

[MENU] [5] [SET]

White balance adjustment includes Auto White, Full-time Auto White (FAW), manual and preset.

5 / BARS

Setting procedures for Auto White (“AUTO1”,

					1 2 3 4
		MENU			SET						“AUTO2”)
				∞/ AW
											Make sure that the Switch 4 located at the side of this unit is set to
			[∞]			Switch 4: [OFF]					[OFF] (lower side).
	Item						Set Value				1. Press the [MENU] button for 1-2 seconds.
											The “MENU” screen will be displayed.
		- - -WHI TE BA LANCE -								- -	2. Use the [5/∞] buttons to select “WHITE BALANCE..”, then press
	WH I TE BA LANCE							AUTO1
		L EVEL ( R )			0						the [SET] button.
		L EVEL ( B )			0
											The “WHITE BALANCE” screen will be displayed.
	S H AD I NG								PRESET
		L EVEL ( R )			- - - - - -						3. Use the [5/∞] buttons to select “WHITE BALANCE”, then press
		L EVE L ( G )
					- - - - - -
		L EVEL ( B )			- - - - - -
	PAGE BACK										the [SET] button.
											The set value displayed will start to blink.
											4. Use the [5/∞] buttons to select “AUTO1” or “AUTO2”, then press
“WHITE BALANCE” Screen
											the [SET] button.
Auto White Operation Area											5. Press the [MENU] button for 1-2 seconds.
											The normal screen will be displayed.
											Note
											Upon returning to the normal screen, place a white object with the
		AUTO W H I T E 1									same illumination conditions as the object, zoom in to the white
		O P ERA T I O N									portion at the centre of the screen (above 80% within the area).
											6. Press the [AW](Auto White) button.
											● When auto white is activated, the auto white operation area
											and “AUTO WHITE1,2 OPERATION” are displayed on the moni-
Auto White Operation Activated
											tor.
											● When white balance is achieved, a rough colour temperature
											as well as “AUTO WHITE1,2 OK” will be displayed for about 3
											seconds before returning to the normal screen.
		AUTO W H I TE 1
			OK (3200K)
Auto White Operation Ends

E-22