JVC LD-HD2KBE, LD-HD2KBU ADVIB, ANO INPUTB, MExhaust Fan, ADVI PASS-THROUGHB, H[IR LED] Terminal, I[SCREEN] Terminal, AVERIFYING OUT-LINKB, ARATE NOT SUPPORTEDB

G[DVI INPUT] Terminal

Signals that can be input are 480i/480p, 576i/576p and 720p/1080i, 50 Hz/60 Hz signals. For passing through when signals with scan rates as high as though output from computers have been input. This unit monitors the DVI input and output statuses at all times and displays the corresponding information on the LCD.

A DVI B

Upon input of compatible signals

A NO INPUT B

When there is no input signal

A VERIFYING OUT-LINK B

When there is an interruption in the DVI connection with the projector

A DVI PASS-THROUGH B

When signals with scan rates as high as though output from computers are detected and then output without conversion

A RATE NOT SUPPORTED B

When signals not supported by this unit are detected while analog RGB or YPrPb output is selected

●It may take a while to display the screen upon input of a HDCP signal.

●In the Setup menu, set the DVI input level and type of sync signal correctly. (A Page 23)

H[IR LED] Terminal

Cannot be used with this processor.

I[SCREEN] Terminal

For controlling the SCREEN TRIGGER-compatible elevating screen. Set A SET: SCREEN TRIGGER B in the Setup menu to A ON B, or set using the RS-232Ccommand. Output DC +12 V/100 mA when the power of this unit is turned On.

●Please read the A Precautions for using the screen terminal B on Page 3 before use.

J[DVI OUTPUT] Terminal

This is the DVI output terminal.

Use the DVI cable supplied with this unit to connect with the projector.

●It may take a while to project the images upon input of a HDCP signal to this unit.

●Set A SET: ACTIVE OUTPUT B of the Setup menu to A ANALOG RGB+DVI B or A DVI B. (A Page 22)

K[RS-232 OPTION] Terminal (D-sub 9 Pin)

Cannot be used with this processor.

L[RS-232 CONTROL] Terminal (D-sub 9 Pin)

This is compliant with the RS-232Cinterface specifications. This unit can be controlled by a computer connected externally. For details, please consult your authorized dealer.

●Set the A SET: RS232 ECHO B and A SET: BAUD RATE B items in the Setup menu. (A Page 24)

MExhaust Fan

Expels warm air to keep the system cool.

Do not block the exhaust fan. This may cause the unit to malfunction.

NAC Power Input Terminal

This is the AC power input terminal. Connect the supplied cord to this terminal.

ENGLISH