JVC LD-HD2KBE, LD-HD2KBU Tint, Color, NOTE:, Detail, Contrast, BPicture Menu, Brightness Button, Adv Color (Advanced Color System)

BPicture Menu

●ABrightnessB, AContrastB, AColorB, ATintB and ADetailB can also be adjusted outside the OSD menu. Press the [BRIGHTNESS] button on the remote control, followed by the number buttons to enter a setting value.

Input Picture Display Patterns

Brightness	50
Contrast	50
Color	50
Tint	50
Detail	4
Adv Color	Normal
................................................................................................

Brightness Button

Adjusts the brightness of the picture image.

Setting Values: 0-100

Default Value: 50

●Adjustment is also possible by pressing the [BRIGHTNESS] button on the remote control. Press the [BRIGHTNESS] button, followed by the number buttons to enter a setting value.

................................................................................................

Contrast

Adjusts the contrast of the picture image.

Setting Values: 0-100

Default Value: 50

................................................................................................

Color

Adjusts the color density of the picture image. Setting Values: 0-100

Default Value: 50

................................................................................................

Tint

Adjusts the hue of the picture image.

Setting Values: 0-100

Default Value: 50

●Adjust this when the colors in the video image do not seem balanced under the current tint settings.

●This item cannot be adjusted for component (YPrPb) signals.

................................................................................................

Detail

Adjusts the image quality.

Setting Values: 0-15

Default Value: 4

●Select your preferred setting values according to the image to be viewed.

................................................................................................

Adv Color (Advanced Color System)

For some DVDs with computer animation or with very high levels of color, the chroma edge processing circuits may not be needed and this can be set to AOFF(Bypass)B. For most sources, the ANormalB setting should be selected.

Setting Values: Normal, Bypass

Default Value: Normal

NOTE:

The menus below will not function if ASET: 1080i TO 1080pB is set to AHIGH BANDWIDTH MODEB.

●Aspect

●Tint

●Detail

●Adv Color (Advanced Color System)

●Display

ENGLISH

27